Whirlpool 3VED23DQDW00 Kullanım ve Bakım Kılavuzu - Sayfa 18

Buzdolabı Whirlpool 3VED23DQDW00 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 3VED23DQDW00 33 sayfaları. No-frost refrigerator-freezer

Sayfayı Yazdır

Removing

the base grille

To remove the grille:

1. Open both doors.

2. Pull base grille forward to release the

support tabs from the metal clips.

3. Do not remove Tech Sheet fastened

behind the grille.

To replace the grille:

1. Line up grille support tabs with metal

clips.

2. Push firmly to snap into place.

3. Close the doors.

See cleaning instructions

for defrost pan

and condenser coils on page 23.

Condenser

coils 7

Using the THIRSTCRUSHER"

dispensing

system

(on some

models)

The ice dispenser

Ice dispenses from the ice maker

storage bin in the freezer. When the

dispenser bar is pressed, a trapdoor

opens in a chute between the dispenser

and the ice bin. Ice moves from the bin

and falls through the chute. When the

dispenser bar is released, a buzzing

sound may be heard for a few seconds

as the trapdoor closes. The dispenser

system will not operate when the freezer

door is open.

For crushed ice, cubes are crushed

before being dispensed. This may cause

a slight delay when dispensing crushed

ice. Noise from the ice crusher is normal,

and pieces of ice may vary in size.

When changing from CRUSHED to

CUBED, a few ounces of crushed ice will

be dispensed along with the first cubes.

Personal

Injury Hazard

Tumbling ice and pressure on a

fragile glass can break it. Use a

sturdy glass when dispensing

ice or

water.

Failure to do so could result in

personal injury or breakage.

To dispense

ice:

1. For cubed ice, move Ice Selector

Switch to CUBED position.

For crushed

ice (on some

models), move Ice Selector

Switch to CRUSHED position.