Whirlpool 3WSC20N4XB00 Kullanıcı Talimatları - Sayfa 13

Buzdolabı Whirlpool 3WSC20N4XB00 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Whirlpool 3WSC20N4XB00 24 sayfaları.

Sayfayı Yazdır

The preset settings should be correct for normal household

usage. The controls are set correctly when milk or juice is as

cold as you like and when ice cream is firm.

Wait at least 24 hours between adjustments. Recheck the

temperatures before other adjustments are made.

To Adjust the Set Points:

The temperature set points appear on the display screen.

To adjust the refrigerator set point, press FRIDGE TEMP.

The set point range for the refrigerator is 2°C to 6°C.

To adjust the freezer set point, press FREEZER TEMP.

The set point range for the freezer is -24°C to -18°C.

NOTE: Each button press advances the temperature setting 1°

higher. After reaching the highest possible set point, the next

button press reverts the setting to the lowest possible set point,

and then each additional press raises the setting 1° higher.

When adjusting temperature set points, use the following chart as

a guide.

CONDITION:

REFRIGERATOR too cold

REFRIGERATOR too warm

FREEZER too cold

FREEZER too warm / Too little ice

Eco Energy

When the most economic and energy-efficient temperature

setting (6°C for the refrigerator or -18°C for the freezer) is

selected, the Eco Energy icon appears on the display screen.

There is one icon for each compartment.

NOTE: On models without a dispenser, you can automatically

select the Eco Energy settings by pressing the ECO ENERGY

button on the control panel. Pressing the button a second time will

restore the previous temperature set points.

Cooling On/Off

Your refrigerator and freezer will not cool when cooling is

turned off.

To turn cooling off, press and hold the VACATION MODE and

FRIDGE TEMP buttons at the same time for 3 seconds.

IMPORTANT: To avoid unintentionally changing other

settings, be sure to press both buttons at exactly the same

time.

When cooling is off, "COOLING OFF" will appear on the

display screen.

Press and hold VACATION MODE and FRIDGE TEMP for

3 seconds again to turn cooling back on.

Vacation Mode

Vacation Mode is designed to help save energy when the

refrigerator will not be used for a few days.

IMPORTANT: Do not use Vacation Mode if perishable foods are

stored in the refrigerator compartment. Such items will likely spoil

if Vacation Mode is active for more than a few hours.

In Vacation Mode, the refrigerator temperature set point is

changed to 12°C and the interior lights turn off. Also, on models

with a dispenser, the dispenser light turns off and the dispenser is

disabled.

TEMPERATURE

ADJUSTMENT:

FRIDGE 1° higher

FRIDGE 1° lower

FREEZER 1° higher

FREEZER 1° lower

Press VACATION MODE to turn on Vacation Mode. The

refrigerator temperature display changes to "-" and the

Vacation Mode icon appears on the display screen.

To turn off the Vacation Mode feature, press VACATION

MODE again or press FRIDGE TEMP. (A single press of

FRIDGE TEMP will simply restore the previous refrigerator set

point; additional presses will adjust the setting.) If Vacation

Mode has been active for 1 hour or more, opening either the

refrigerator or freezer door will also turn off the Vacation Mode

feature. The Vacation Mode icon will disappear when the

feature is off.

The Control Lock

The control panel can be turned off for easy cleaning or to avoid

unintentional changes by small children and pets.

NOTE: The lock feature does not shut off power to the refrigerator

or to the ice maker. It simply deactivates the control buttons and

dispenser pad, and turns off the dispenser light. To turn off the ice

maker, see "Ice Maker and Storage Bin."

The display screen indicates when the control panel is locked.

On models with a dispenser:

Press and hold ICE SELECTION and RESET ALARM for

3 seconds to lock the control panel and dispenser.

IMPORTANT: To avoid unintentionally changing other

settings, be sure to press both buttons at exactly the same

time.

Press and hold ICE SELECTION and RESET ALARM a second

time to unlock the control panel and dispenser.

On models without a dispenser:

Press and hold ECO ENERGY and RESET ALARM for

3 seconds to lock the control panel.

IMPORTANT: To avoid unintentionally changing other

settings, be sure to press both buttons at exactly the same

time.

Press and hold ECO ENERGY and RESET ALARM a second

time to unlock the control panel.

Air Filter Status Indicator

The air filter status indicator, located on the control panel's display

screen, will help you know when to change your air filter.

When the air filter is in good condition, the air filter status

indicator icon does not appear on the control panel.

When the control panel's air filter status indicator icon appears

in orange, this tells you that it is almost time to change the air

filter. It is recommended that you order a replacement filter

when the orange icon appears.

Replace the air filter when the air filter status indicator icon

changes from orange to red. The filter should be replaced at

least every 6 months.

See "Install Air Filter" for instructions on replacing.

After changing the air filter, reset the status indicator by

pressing and holding the RESET ALARM button for

3 seconds. When the system is reset, the air filter status

indicator icon will disappear from the display screen.