Whirlpool 4ET14GK Kullanım ve Bakım Kılavuzu - Sayfa 5

Buzdolabı Whirlpool 4ET14GK için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 4ET14GK 20 sayfaları. No-frost refrigerator-freezer

Sayfayı Yazdır
Before Using Your
Refrigerator
I
In This
Section
Page
Page
I
I
Cleaning
your refrigerator
................ .5
Installing
it properly
...........................
6
Plugging
it in
it.. ..........................................
......................................
.5
Leveling
6
I
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it and level it.
Cleaning
your
refrigerator
Removing
packaging
materials
Remove tape and any inside labels (except
the model and serial number label) before
using the refrigerator.
To remove any remaining
glue:
l
Rub briskly with your thumb to make a ball,
then remove.
OR
l
Soak area with liquid hand-dishwashing
detergent before removing glue as
described above. Do not use sharp
instruments,
rubbing alcohol, flammable
fluids or abrasive cleaners. These can
damage the material. See "Important
Safety Instructions"
on page 3.
NOTE: Do not remove any permanent
instruction labels inside your refrigerator. Do
not remove the Tech Sheet fastened under
the refrigerator at the front.
Cleaning
it before
use
After removing all packaging materials,
clean your refrigerator before using it, if
necessary. See cleaning instructions
on
pages 12 and 13.
Plugging
it in
Recommended
Grounding
Method
A 220 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical
supply is required. It is recommended
that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.