Ariston TCM 80 Kullanım Kılavuzu - Sayfa 9

Kurutucu Ariston TCM 80 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ariston TCM 80 24 sayfaları.

How to carry out a

drying cycle

Starting a drying programme

1. Plug the dryer into the power supply socket.

2. Select a suitable drying programme for the type of laundry (see Laundry).

3. Open the door, ensure that the filter is clean and securely placed.

4. Load the machine, making sure that no piece of laundry gets between the door and the door

seal. Close the door.

5. Turn the "Drying time selector" knob until the indicator is pointing towards the most suitable

drying time for the type of fabric in that load. Use the table to check the relationship between fabric

type and load capacity (see Drying settings), and make sure you are familiar with the instructions

provided for each type of fabric (see Laundry). Do not attempt to turn the knob anticlockwise.

6. If necessary, set the temperature using the HIGH HEAT button.

7. Press the START button to start the drying cycle.

Laundry can be checked while the drying programme runs and any garments already dry can be

removed, while drying continues for the remaining items. After closing the door, press the START

button to resume machine operation.

8. The final COOL TUMBLE phase (i.e. the fabrics are cooled) activates during the last few minutes

of the drying programme; always allow this phase to terminate.

9. Open the door, remove the laundry then clean the filter and replace it.

10. Disconnect the dryer from the power supply.