Cal Test Electronics CT3197B Kullanıcı Kılavuzu - Sayfa 3
Medya Dönüştürücü Cal Test Electronics CT3197B için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cal Test Electronics CT3197B 8 sayfaları. Hv probe bnc converter
Sayfayı YazdırUse Only in Office-Type Indoor Setting
The converter is designed to be used in office-type indoor
environments. Do not operate high voltage probes:
z
In the presence of noxious, corrosive, flammable
fumes, gases, vapors, chemicals, or finely-divided
particulates.
In environments where there is a danger of any liquid
z
being spilled on the probe.
In air temperatures exceeding the specified operating
z
temperatures.
In atmospheric pressures outside the specified altitude
z
limits or where the surrounding gas is not air.
Only Qualified Personnel
This converter is intended for personnel who are trained,
experienced, or otherwise qualified to recognize hazardous
situations and who are trained in the safety precautions necessary
to avoid possible injury when using such a device.
Observe Maximum Working Voltage
Do not use this converter with any probe above its maximum
working voltage ranges.
Must be Grounded
Do not rely on this converter for high voltage probe grounding.
Always properly ground the high voltage probe with its ground lead
before connecting to high voltage circuits. Always disconnect the
probe from high voltage circuits before disconnecting the ground
lead. Do not connect the probe ground lead to any point which is at
a potential other than earth ground.
Cleaning
Use a soft cotton cloth lightly moistened with a mild solution of
detergent and water. Do not allow any portion to be submerged
at any time. Dry thoroughly before attempting to make voltage
measurements. Do not use solvents or solvent fumes as they may
cause deterioration or damage.
450907-001 Rev. A
caltestelectronics.com
2