AEQ Phoenix Mobile Uygulama Notu - Sayfa 4

Kayıt Ekipmanları AEQ Phoenix Mobile için çevrimiçi göz atın veya pdf Uygulama Notu indirin. AEQ Phoenix Mobile 8 sayfaları. Audio codec system
Ayrıca AEQ Phoenix Mobile için: Uygulama Notu (8 sayfalar)

Sayfayı Yazdır

2. OTHER POINTS TO CHECK

We are now going to quickly overview the rest of configuration menus where it is

recommended to check that every parameter is correctly configured.

Coding Algorithm

At the Wizard menu Sel.Codec should be G722, for a start, although you can change

this at a later stage for better quality. In order to change the coding algorithm by

another pre-selected one, just select the Sel.codec line, press Select and select one

within the new window shown. In order to choose the particular coding modes in each

list shown in the Sel.codec menu, go to Menu

Select

Options.

The audio routing will be most likely correct by default to send Mic 1 audio to the

transmission and send the received stream to HP1 headphone output. You can,

however, make sure of this from Menu

Configure the rest of parameters after reading the manual according to your particular needs.

PROXY SIP Configuration

You can make sure that this is correct from the main screen: Menu

5. Communications

Check that User Name is filled with a user identifier that is previously registered at the

AEQ SIP server (for example: phoenix_123)

STUN Protocol

2 Activate ON (this is important and recommended, as it will ease connecting

to other equipment that is behind a router in a local network).

3 Server: At the moment of writing this document, the following STUN server is

recommended: stun.sipgate.net (IP=217.10.68.152)

If the DNS Server field in the communications menu hasn't been configured,

you must substitute the STUN name by its IP.

4 Port: 3478

Press "Back" key in order to go to 3. SIP config

1 Activate ON

2 Address: sip.aeq.es

If the DNS Server field in the communications menu hasn't been configured,

you must substitute the SIP server name ("sip.aeq.es") by its IP.

3 User: must have the same text value as USER NAME from the former menu.

4 Password: a correct password must be typed in ("aeq" by default).

5 Realm.: sip.aeq.es

6 Domain: sip.aeq.es

TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:

ADVANCED

3. SIP config

1. Parameters

APLICACIONES ELECTRONICAS QUASAR S.A.

ADVANCED

6. Link profiles

3. Audio Settings

ADVANCED

2. Proxy and check:

www.aeq.eu

Select.