Whirlpool WED97HEXW Kullanıcı Kılavuzu - Sayfa 9
Kurutucu Whirlpool WED97HEXW için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Whirlpool WED97HEXW 24 sayfaları. Electronic dryer
Ayrıca Whirlpool WED97HEXW için: Kullanım Kılavuzu (8 sayfalar), Kullanım ve Bakım Kılavuzu (36 sayfalar)
Sayfayı Yazdır
3.
connect ground wire
A
F
Connect ground wire (F) (green or bare) of power supply cord
under green external ground conductor screw (A). Tighten
screw.
4.
connect remaining wires
Connect remaining wires under outer terminal block screws.
Tighten screws. Finally, reinsert tab of terminal block cover
into slot of dryer rear panel. Secure cover with hold-down
screw. Now, go to Venting Requirements.
3-Wire Power Supply cord connection
Use where local codes permit connecting cabinet-ground
conductor to neutral wire.
3-wire receptacle (NEMA
type 10-30R)
Spade terminals with
upturned ends
3-prong plug
Ring terminals
1.
Remove center screw
Remove center terminal block screw (B).
2.
connect neutral wire
Connect neutral wire (white or center) (C) of power supply cord
under center terminal block screw (B). Tighten screw.
3.
connect remaining wires
Connect remaining wires under outer terminal block screws.
Tighten screws. Finally, reinsert tab of terminal block cover
into slot of dryer rear panel. Secure cover with hold-down
screw. Now, go to Venting Requirements.
B
B
C
9