Whirlpool 1CWED4900DW0 Kullanım ve Bakım Kılavuzu - Sayfa 8

Kurutucu Whirlpool 1CWED4900DW0 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 1CWED4900DW0 28 sayfaları.

Sayfayı Yazdır

Select the desired cycle

Tumble

Damp

Press

Dry

TIMED

DRY

Heavy

Dry

OFF

WP_WEGD4900XW

Select the desired cycle for your load. See the Cycle Guide

for more information about each cycle.

ACCUDRY™/AUTOMATIC DRY Cycles

You can select a different dryness level, depending on your

load, by turning the knob to dryness level.

Selecting Very Dry, ENERGY PREFERRED, or Less Dry

automatically adjusts the dryness level at which the dryer will

shut off. Once a dry level is set, it cannot be changed without

stopping the cycle.

ACCUDRY™/AUTOMATIC DRY cycles give the best drying in

the shortest time. Drying time varies based on fabric type, load

size, and dryness setting.

NOTE: Very Dry removes more load moisture. ENERGY

PREFERRED is used for a starting point for ACCUDRY™

cycles. Choose ENERGY PREFERRED for optimal energy

savings. Less Dry removes less moisture and used for loads

you may want to put on a hanger to complete drying.

Set cycle settings and options

TEMPERATURE

fabric

Select cycle settings and options by turning the knob to the

desired position.

NOTE: Not all options and settings are available with all cycles.

TEMPERATURE / Fabric

Turn the TEMPERATURE / Fabric knob to change the drying

temperature setting. See "Setting the Drying Temperature".

Wrinkle Shield™ feature (on some models)

Get up to 40 minutes of heat-free, periodic tumbling at the

end of a cycle. Turn the WRINKLE SHIELD™ knob to select

ON or OFF at any time before the cycle has ended.

Cool Down

ACCUDRY

OFF

sensor dryer

Jeans

Very Dry

ENERGY PREFERRED

Delicate

Less Dry

Cool Down

OFF

WRINKLE

SHIELD

WRINKLE SHIELD

Select End of Cycle Signal

(if desired)

PUSH TO START

Turn the END OF CYCLE SIGNAL knob to select the

desired setting (On or Off). The End of Cycle Signal produces

an audible sound when the drying cycle is finished. Promptly

removing clothes at the end of the cycle reduces wrinkling.

NOTE: When the Wrinkle Shield™ setting is selected

and the End of Cycle Signal is on, the tone will sound every

5 minutes until the clothes are removed, or the Wrinkle

Shield™ setting ends.

Press PUSH to START to

begin cycle

PUSH TO START

Push and hold the PUSH to START knob to begin the cycle.

Promptly remove garments after cycle has completed to reduce

wrinkling. Use the Wrinkle Shield™ feature to avoid wrinkling

when you are unable to remove a load from the dryer as soon

as it stops.