Whirlpool 240-VOLT ELECTRIC DRYER Kullanım ve Bakım Kılavuzu - Sayfa 11

Kurutucu Whirlpool 240-VOLT ELECTRIC DRYER için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 240-VOLT ELECTRIC DRYER 33 sayfaları. 240-volt electric dryer
Ayrıca Whirlpool 240-VOLT ELECTRIC DRYER için: Kullanım ve Bakım Kılavuzu (20 sayfalar), Kullanım ve Bakım Kılavuzu (24 sayfalar), Kullanım ve Bakım Kılavuzu (24 sayfalar), Kullanım ve Bakım Kılavuzu (32 sayfalar)

Three-Wire Electrical Connection (Direct Wire)

wWARNING

Fire Hazard

Use 10 gauge solid copper wire.

Use a UL approved strain relief.

Disconnect power before making

electrical connections.

Connect neutral wire (white or center

wire) to center terminal (silver).

Ground wire (green or bare wire) must

be connected to green ground

connector.

Connect remaining 2 supply wires

to remaining 2 terminals (gold).

Securely tighten all electrical

connections.

Failure to follow these instructions can

result in death, fire, or electrical shock.

The dryer can be connected directly to fused

disconnect or circuit breaker box with three-

wire, flexible armored or non-metallic

sheathed copper cable (with grounding wire).

All current-carrying wires must be insulated.

A conduit connector must be installed at

junction box. Allow four feet of slack in the

line so dryer can be moved if servicing is

ever necessary.

1. Disconnect power.

• Strip 3

⁄

inches of outer covering from

end of cable.

• Cut 1 inch of insulation from the end of

each insulated wire. Shape the end of

each wire into a "U" shaped hook.

INSTALLATION INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be connected to a

grounded metal, permanent wiring system;

or an equipment-grounding conductor

must be run with the circuit conductors and

connected to the equipment-grounding

terminal or lead on the appliance.

SAVE THESE INSTRUCTIONS

continued on next page