Whirlpool 3XWGD5705SW0 Kullanım ve Bakım Kılavuzu - Sayfa 13

Kurutucu Whirlpool 3XWGD5705SW0 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 3XWGD5705SW0 40 sayfaları. Electric and gas dryer

Sayfayı Yazdır

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Place dryer at least 46 cm (18 inches) above the floor

for a garage installation.

Failure to do so can result in death, explosion,

or fire.

Is the dryer located in a room with temperature below

7ºCF (45ºF)?

Proper operation of dryer cycles requires temperatures above

7ºCF (45ºF).

Is the dryer located in a closet?

Closet doors must have ventilation openings at the top and

bottom of the door. The rear of the dryer requires 12.7 cm (5")

of airspace for most installations, and 2.5 cm (1") is

recommended for the sides and front of the dryer. See the

Installation Instructions.

Has an air dry cycle been selected?

Select the right cycle for the types of garments being dried.

Before calling for assistance or service, please check the

"Troubleshooting" section. It may save you the cost of a service

call. If you still need help, contact the dealer from whom you

purchased the dryer, or a Whirlpool designated service company.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

ASSISTANCE OR SERVICE

If you need replacement parts

If you need to order replacement parts, we recommend that you

use only factory specified parts. These parts will fit right and work

right because they are made with the same precision used to

build every new WHIRLPOOL

To locate replacement parts in your area

Contact the dealer from whom you purchased the dryer, or a

Whirlpool designated service company.

Is the load too large and heavy to dry quickly?

Separate the load to tumble freely.

Lint on load

Is the lint screen clogged?

Lint screen should be cleaned before each load.

Stains on load or drum

Was dryer fabric softener properly used?

Add dryer fabric softener sheets at the beginning of the cycle.

Fabric softener sheets added to a partially dried load can

stain your garments.

Drum stains are caused by dyes in clothing (usually blue

jeans). This will not transfer to other clothing.

Loads are wrinkled

Was the load removed from dryer at the end of the cycle?

Was the dryer overloaded?

Dry smaller loads that can tumble freely.

Odors

Have you recently been painting, staining or varnishing in

the area where your dryer is located?

If so, ventilate the area. When the odors or fumes are gone

from the area, rewash and dry the clothing.

Is the electric dryer being used for the first time?

The new electric heating element may have an odor. The odor

will be gone after the first cycle.

appliance.