Whirlpool AWD60A Servis Kılavuzu - Sayfa 11
Kurutucu Whirlpool AWD60A için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Whirlpool AWD60A 22 sayfaları. Tumble dryer
Ayrıca Whirlpool AWD60A için: Kullanım Kılavuzu (32 sayfalar), Kullanım Kılavuzu (16 sayfalar)
![Whirlpool AWD60A Servis Kılavuzu](/uploads/products/server2/6834795/6834795.jpg)
CONTROL PANEL
A. Program knob
Turn this knob to choose the drying program you desire. This dryer has 7 program options
available for you to choose.
B. Start / Pause button
After turning on the power, select the drying program you desire.
Gently touch Start / Pause button to start the dryer. To Pause a program gently touch
this button during the operation of the dryer. The display screen will flash and the machine
will be halted.
Press the Start / Pause button again and the program will continue to operate. Also used to
set up the time of the set program.
C. LED screen
This screen displays the remaining time for a program and the delay time.
D. Delay button
You may choose to start the dryer after a preset time. The delay range is between 1 and 12
hours. Gently touch the Delay button before a program starts, each touch of the Delay button
will add one hour. When in excess of 12 hours, the remaining time will be re-displayed. After a
delay time is set, touch the Start / Pause button to start the delay operation and the indicator
light will flash. Also used to set up the time of the set program.
Set Drying Time
The Set Program is used to set the drying time program, by increasing or decreasing the drying
time through the use of the Start and the Delay buttons.
When the Set Timer Program is selected, the default drying time will be 1:40, at this
•
stage the LED display will be flashing.
•
Use the Delay button to increase the drying time by 10 minutes for each press of the Delay
button, until 4:00 is reached. If the Delay button is pressed again it will be ineffective.
•
Use the Start / Pause button to decrease the drying time by 10 minutes, until 0:20 is reached.
If the Start / Pause button is pressed again it will be ineffective.
•
Once the program is set and there are no new adjustments during the 5 seconds (shown by
the LED flashing five times), it indicates that the drying time has been set.
•
When the Start / Pause button is pressed, the program will run as per the time selected.
Tumble Dryer
Page 9
Model:AWD60A