Whirlpool AWZ 8CDS/DF Hızlı Başlangıç Kılavuzu - Sayfa 3

Kurutucu Whirlpool AWZ 8CDS/DF için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Whirlpool AWZ 8CDS/DF 4 sayfaları.

Sayfayı Yazdır

Quick guide

CARE AND MAINTENANCE

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance, please

WARNING: unplug the dryer during the cleaning and

maintenance procedures.

Emptying the water tank after each cycle (see Fig. A).

Pull the container out of the dryer and empty it into a sink or other

suitable drain, then place it back properly. Do not use the dryer

without having inserted the container back in place.

Cleaning the door filter after each cycle (see Fig. B).

Pull the filter out and clean it by removing the lint from the filter

surface under running water or using a vacuum cleaner. For optimal

performance, dry up the filter before inserting it back in place.

Do not use the dryer without having reinserted the filter in place.

Remove the door filter as described below:

1. Open the door and pull the filter upwards.

2. Open the filter and remove the lint from all its parts. Replace the

filter correctly making sure it is fully seated.

Cleaning the bottom filter when the relevant indicator

turns on (see Fig. C).

Pull the filter out and remove the lint from its surface by washing

it under runing water or by using a vacuum cleaner.

However, it is advisable to clean this filter after each cycle to

optimise drying performance.

Do not use the dryer without having reinserted the filter in place.

Remove the bottom filter and the condenser as described

below:

1. Open the bottom cover;

2. Take the handle and pull the filter out.

3. Open the rear side of the filter and remove the lint from the

inner surface of the mesh.

4. Clean the filter chamber (there might be residual water: this is

normal).

5. Approximately every 3 months, clean the condensing unit

(figure D) situated behind the bottom filter.

• Lower the levers situated on the sides of the condenser.

Pull the handle to remove the condenser and clean it under

running water.

• Put the the condenser back in place and lift the levers.

6. Close the rear side of the filter and place it back by checking it

is perfectly integrated in place.

7. Lower the filter handle and close the bottom cover.

8. Make sure the air intake is free.

PRODUCT DESCRIPTION

Water Tank

Air Intake

Bottom filter and condenser

Door filter

Policies, standard documentation, ordering of spare parts and additional product information can be

found by:

• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identifi cation plate.

The filters are essential parts for drying. They are intended

to collect the lint formed during drying process. In case

Before using the appliance carefully read the Safety

Instructions.

of clogged filters, the air flow inside the dryer would be

seriously affected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

Cleaning the tumble dryer

• The external metal, plastic and rubber parts can be cleaned

with a damp cloth.

• Clean the front air intake grille regularly (every 6 months) with

a vacuum cleaner to remove any lint, fluff or dust deposits.

Furthermore, remove any lint deposits from the filters area,

using a vacuum cleaner every so often.

• Do not use solvents or abrasives.

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Remove the water from the water tank completely.

3. Make sure that door and water tank are properly closed.

4. If the drain hose is connected to your drainage system,

re-connect it to the back of the dryer (see "Installation" section

in the Safety Instruction guide).

Power consumption

off-mode (Po) - Watts

left-on mode (Pl) - Watts

Programs

Eco Cotton *

Eco Cotton

Synthetics

*This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most efficient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting configuration).

0.13

2.00

kWh

Minutes

4.72

130

2.59

1.84

xxxx

xxxxxxxxxxxx