Whirlpool CGM2793BQ Kurulum Talimatları Kılavuzu - Sayfa 20
Kurutucu Whirlpool CGM2793BQ için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Whirlpool CGM2793BQ 48 sayfaları. Commercial dryer gas or electric
Ayrıca Whirlpool CGM2793BQ için: Kurulum Talimatları Kılavuzu (48 sayfalar)
Sayfayı Yazdır
ELECTRIC DRYER ELECTRICAL
CONNECTIONS
(FOR
U.S.A.
ONLY)
Connecting
3=Wire Connection:
Power Supply Cord
Standard Power Cord Connectors
Flanged Spade Connector
Ring Connector
2. Connect neutral wire (white or center wire)) (D) of power
supply cord under center terminal block screw (A). Tighten
screw.
Connecting
Neutral Wire
1. Loosen or remove center terminal block screw (A).
3. Connect remaining wires under outer terminal block screws
(F). Tighten screws. Finally, reinstall terminal block to dryer
rear panel. Secure cover with hold-down
screw.
"
n
1i
Connecting
4-Wire
Connection:
Direct Wire
IMPORTANT: A 4-wire connection
is required for mobile
homes and where local codes do not permit the use of 3-wire
connections.
Direct wire cable must have 5 ft. (1.52 m) of extra length so
dryer can be moved if needed.
Strip 5" (127 mm) of outer covering from end of cable, leaving
bare ground wire at 5" (127 mm). Cut 11/2"(38 mm) from 3
remaining wires. Strip insulation back 1" (25 mm). Shape ends
of wires into a hook shape.
Connecting
Neutral Ground and Neutral Wires
1. Remove center terminal block screw (A) and the neutral
ground wire (B) by removing the green external ground
conductor screw (C).
20