Whirlpool WGD7300DW Kurulum Talimatları Kılavuzu - Sayfa 24
Kurutucu Whirlpool WGD7300DW için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Whirlpool WGD7300DW 44 sayfaları. Gas and electric dryer 29" wide models
Ayrıca Whirlpool WGD7300DW için: Kullanım ve Bakım Kılavuzu (40 sayfalar)
Sayfayı Yazdır
10.
Remove door strike and
door strike plug
Door strike
Remove door strike and door strike plug from dryer cabinet.
Insert the door strike into door strike plug hole and secure
with screw. Insert door strike plug into original door strike
hole and secure with screw.
11.
Remove and transfer
hinge hole plugs
Use a small, flat-blade screwdriver to gently remove 4 hinge
hole plugs on left side of dryer cabinet. Transfer plugs into
hinge holes on opposite side of dryer cabinet.
24
Door strike plug
NOTE: Two people may be needed to reinstall door.
Insert screws into the bottom holes on left side of dryer
cabinet. Tighten screws halfway. Position door so large
end of door hinge slot is over screws. Slide door up so
screws are in bottom of slots. Tighten screws. Insert
and tighten top screws in hinges.
Close door and check that door strike aligns with door
catch. If it is needed, slide door catch left or right within
slot to adjust alignment.
TROUBLESHOOTING
See the Use and Care Guide or visit our website and
reference Frequently Asked Questions to possibly avoid
the cost of a service call.
12.
Insert screws in hinge holes on
dryer cabinet
13.
Check door strike alignment