Whirlpool WGD80HEBW0 Kullanım ve Bakım Kılavuzu - Sayfa 7
Kurutucu Whirlpool WGD80HEBW0 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool WGD80HEBW0 40 sayfaları. Electronic dryer
Sayfayı Yazdır
O
O
O
O
POWER
Touch to turn the dryer on and off. Touch to stop/cancel
a cycle at any time.
CYCLE
CONTROL
KNOB
Use your dryer's cycle control knob to select available
cycles on your dryer. Turn the knob to select a cycle
for your laundry load. See "Cycle Guide" for detailed
descriptions
of cycles.
START/PAUS
E
Touch and hold until the LED comes on to start a cycle, or
touch once while a cycle is in process to pause it.
LED DISPLAY
AND SETTINGS
When you select a cycle, its default settings will light up
and the Estimated Time Remaining (for Automatic
Cycles)
or actual time remaining (for Manual Cycles) will be
displayed. For times longer than 99 minutes, hours
will be displayed followed by minutes.
Automatic
Cycles are Heavy Duty, Normal, Bulky, Casual
(on some models), Delicates, and Sanitize (on some
models). Manual Cycles are Quick Dry and Timed Dry. The
Steam Cycle (on some models) is Steam Refresh. Touch
along the bottom of the display to adjust settings. Touch
"+" or "-" with Manual Cycles to increase or decrease
the length of a Timed Dry or Quick Dry cycle. See "Cycle
Guide" for available settings on each cycle. Not all settings
are available with all cycles.
Cycle Status Lights
The indicator bar at the top of the display will let you
know what stage of the drying cycle is in process.
For more information on each stage, see "Cycle Status
Indicators."
Temp
When using Manual Cycles, you may select a dry
temperature
based on the type of load you are drying.
Use the warmest setting safe for the garments in the
load. Follow garment label instructions.
NOTE: Automatic
Cycles use a preset temperature that
is not adjustable.
Dryness Level
You may adjust the Dryness Level on Automatic
Cycles
(except for the Sanitize cycle), if desired.
NOTE: Dryness Level is for use with Automatic
Cycles
only.
Damp Dry Signal (on some models)
Touch to select the Damp Dry Signal. When selected, a
series of beeps will sound when the load is damp, but
not completely
dry. This will allow you to take clothes
out of the load that do not need to dry completely.
This option is available on Heavy Duty, Normal, Bulky,
Casual, and Delicates cycles. The Damp Dry Signal is
selected as a default for the Bulky cycle, as a reminder
to manually reposition bulky loads midway through the
cycle.
Wrinkle Shield
TM
Option
If you will be unable to remove a load immediately,
touch Wrinkle Shield to add up to 140 minutes of
periodic tumbling to help reduce wrinkling. You may
select the "With Steam" setting (on some models)
to add a short steam cycle after 60 minutes to help
smooth out wrinkles.
O
OPTIONS
Use to select available options for your dryer. Not all
cycles and options are available on all models.
Drum Light (on some models)
Touch to turn the LED drum light on or off. The light
will also turn on when the door is open, and turn off
automatically
after about 5 minutes.
Q
Cycle Signal (on some models)
Use this to turn the signal indicating the end
of a drying cycle on or off.
NOTE: You may also turn off the tones that sound
when a feature, setting, or option is touched. Touch
and hold Cycle Signal for about one second to turn
sounds on or off.
Q
Control
Lock
Use to lock the controls of the dryer and avoid
an accidental change in cycle options or preferences
during a drying cycle.
NOTE: The Control Lock function may be enabled
when recovering from a power failure. To unlock the
control, touch and hold CONTROL LOCK for at least
3 seconds.
7