Whirlpool WGD94HEXR0 Kullanım ve Bakım Kılavuzu - Sayfa 11
Kurutucu Whirlpool WGD94HEXR0 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool WGD94HEXR0 40 sayfaları. Electronic dryer
Sayfayı Yazdır
5, Adjust cycle settings,
if desired
11-cycle model shown
You may adjust different settings, depending on whether you
have selected an Auto Cycle, Manual Cycle, or Steam Cycle.
See the Cycle Guide for detailed information.
NOTE: Not all options and settings are available with all cycles.
Not all cycles are on all models.
Auto Cycles:
You can select a different dryness level, depending on your
load, by pressing the button for More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
Automatic cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
Manual Cycles:
When you select a Manual Cycle, the default
time appears in the display. Use the A and V
buttons to increase or decrease the time in
1 minute increments. Press and hold to
change the time in 5 minute increments.
The default temperature
may be changed
by pressing the Temperature button until the
desired dry temperature
is lit.
Quick Refresh with Steam:
Press the Garment # to select the number of garments in
the load (on some models). The dryer will automatically set the
drying time and temperature.
For models without Garment #,
the cycle time is preset to 15 minutes and is not adjustable.
6, Select
any additional
options
Static Reduce
Wrinkle Shield
with Steam
11-cycle model shown
Add additional options such as Static Reduce, Wrinkle Shield/
Wrinkle Shield with Steam and/or EcoBoost by pressing the
button for that option.
NOTE: Not all options and settings are available with all cycles.
7.
Press and hold START/PAUSE
to begin
cycle
START/PAUSE
Hold
to
START
Press and hold the START/PAUSE button to begin the cycle.
8.
Remove
garments
promptly
after cycle is finished
11-cycle model shown
Wrinkle Shield
Promptly remove garments after cycle
w_th S team
has completed to reduce wrinkling. If
you will be unable to remove the load
promptly, select the Wrinkle Shield/Wrinkle
Shield with Steam
option before pressing START/PAUSE.
the Auto Cycle settings
to increase
drying
time
If all your loads on all Auto Cycles are consistently
not as
dry as you would like, you may change the default
settings to increase the default dryness level.
Your automatic drying settings can be adjusted to adapt to
different installations,
environmental
conditions or personal
preference. This change is retained and will affect all of your
Automatic cycles, not just the current cycle/load. There
are 3 drying settings, which are displayed using the time
display:
01 Factory preset dryness level.
02 Slightly drier clothes, 15% more drying time.
03 Much drier clothes, 30% more drying time.
To change
the drying
settings:
NOTE: The settings cannot be changed while the dryer is
running or paused. The dryer must be in standby mode (the
power button is off) to adjust the default settings.
1. Before starting a cycle, press and hold the TEMP button
for 6 seconds.
2. Press the TEMP button to select the dryness level
shown in the time display: 01,02, or 03.
3. Press START/PAUSE to save the new dryness level
setting.
11