Whirlpool YWED7500VW2 Kullanım ve Bakım Kılavuzu - Sayfa 16

Kurutucu Whirlpool YWED7500VW2 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool YWED7500VW2 40 sayfaları.

LEVEL DRYER

Level dryer

Place

level here

Check levelness of dryer from

side to side. Repeat from front to back.

NOTE: The dryer must be level for the moisture sensing

system to operate correctly.

Not Level

Adjust leveling legs

If dryer is not level, prop up using a wood block, use wrench

to adjust legs up or down, and check again for levelness.

Once dryer is level, make sure all four legs are snug against

the floor and dryer does not rock.

LEVEL

Not Level

COMPLETE INSTALLATION

CHECKLIST

Check that all parts are now installed. If there is an extra

part, go back through steps to see what was skipped.

Check that you have all of your tools.

Dispose of/recycle all packaging materials.

Check dryer's final location. Be sure vent is not crushed

or kinked.

Check that dryer is level. See "Level Dryer."

Remove film on console and any tape remaining on dryer.

Wipe dryer drum interior thoroughly with a damp cloth to

remove any dust.

Read "Using Your Dryer."

For power supply cord installation, plug into a grounded

outlet. For direct wire installation, turn on power.

Set the dryer on an Auto Dry Cotton/Linen cycle. Do not use

Timed Dry cycles.

If dryer will not start, check the following:

• Controls are set in a running or "On" position.

• Start button has been pushed firmly.

• Dryer is plugged into an outlet and/or electrical

supply.

• Household fuse is intact and tight, or circuit breaker

has not tripped.

• Dryer door is closed.

NOTE: You may notice an odor when dryer is first heated.

This odor is common when heating element is first used.

The odor will go away.