Whirlpool YWED85HEFW2 Kurulum Talimatları Kılavuzu - Sayfa 4

Kurutucu Whirlpool YWED85HEFW2 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Whirlpool YWED85HEFW2 48 sayfaları.

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation.

Tools needed for all installations:

Flat-blade screwdriver

1/4" (6 mm) and

5/16" (8 mm) nut driver

(recommended)

Tape measure

Utility knife

Caulking gun and

compound (new vent

installations)

#2 Phillips screwdriver

Level

Pliers

Tin snips (new vent

installations)

Adjustable wrench that

opens to 1" (25 mm) or

hex-head socket wrench

Tools needed for gas installations:

8" (203 mm) or 10"

(254 mm) pipe wrench

Pipe-joint compound

resistant to propane gas

Parts supplied (all models):

Leveling legs (4)

Parts needed (steam models):

"Y" connector

Rubber washer

Parts package is located in dryer drum. Check that all parts

are included.

NOTE: Do not use leveling legs supplied with dryer if installing

with a pedestal or a stack kit.

Parts needed (not supplied with dryer):

Vent clamps

■

Vent elbows and vent work

■

8" (203 mm) or 10"

(254 mm) adjustable wrench

(for gas connections)

2' (0.6 m) inlet hose

5' (1.52 m) inlet hose