CALB CAM72 Ürün Kullanım Kılavuzu - Sayfa 8

Kamera Aksesuarları CALB CAM72 için çevrimiçi göz atın veya pdf Ürün Kullanım Kılavuzu indirin. CALB CAM72 10 sayfaları.
Ayrıca CALB CAM72 için: Ürün Kullanım Kılavuzu (7 sayfalar)

Sayfayı Yazdır

Product User Manual

Annex 1：The main battery model parameters table

CAM72

SE60

Nominal capacity

72Ah

60Ah

Internal resistance

≦1 mΩ

≦0.8mΩ

Length

135±0.3

142±1

Diameters

Width

50±1

(mm)

Height

220.85±0.5

218±2

Weight(about)

1.75Kg

2.3Kg

Type of shell

Aluminum

Nominal voltage

Maximum

Charge

charging current

Maximum

charging voltage

chargingvoltage

Maximum

discharging current

Discharge

Termination

voltage

Standard Charge

Charging time

Fast Charge

SOC Recommended

Charge

Temperature

Discharge

Short term

(within one month)

Storage

temperature

Long-term

(within a year)

Storage humidity range

Note: There may be difference between the real product performance and this version due to the design changes, all the parameters are subject to

our business contact confirmation.

Annex 2: Instructions for CAM Series battery protection components installation.

1. Overview

This instruction is only applied for the installation of plastic protection components in CAM series Li-on prismatic cells

manufactured by CALB.

2. Installation for CAM Series battery protection components

The protection components for CAM Series are injected molding by flame-retardant ABS + PC material, with flame retardant grade

level V0, thus protecting battery in the metal shell from instability under shock, impact, high pressure and others.

The battery protector is divided into four parts, as shown in Figure 1, include: pole protector, upper protector, lower protector, and

grouping separators.

SE180

SE200

CA40

CA60

CA100

CA180

180Ah

200Ah

40Ah

60Ah

100Ah

180Ah

≦0.5mΩ

≦0.9mΩ

≦0.8mΩ

≦0.6mΩ

≦0.5mΩ

182±1

116±1

115±1

142±1

180±1

71±1

71±1.5

46±1

41±1

67±1

71±1.5

279±2

180.5±2

244±2

215.5±2

279±2

5.6Kg

5.7Kg

1.45Kg

2.0Kg

3.3Kg

5.6Kg

Plastic

3.2V

3.65V

2.5V

10%~90%

0°C ~ 45°C

-20°C ~ 55°C

-20°C ~ 45°C

-20°C~ 25°C

<70％

CA400

Pole Protector

400Ah

≦0.4mΩ

450±2

Upper protector

71±1.5

281±2

13.8Kg

Single battery

Lower protector

2 .1 Installation for CAM Series single battery protection components

Installation for CAM Series single battery can be followed by four steps:

First: Install lower protector as figure 2.

Lower protector

Installation requirements:

Depress the battery into the lower protector from up to down by force to ensure the battery no slant and below protector wrapping the

bottom of the battery, no loose connection between protector and battery, and no drop.

Grouping separators

Figure 1

Figure 2