3Com 3CRWEASYG73 - 11g Wireless LAN Outdoor Hızlı Başlangıç Kılavuzu - Sayfa 11
Ağ Donanımı 3Com 3CRWEASYG73 - 11g Wireless LAN Outdoor için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 3Com 3CRWEASYG73 - 11g Wireless LAN Outdoor 14 sayfaları. 11g 54mbps wireless lan building-to-building bridge family
Ayrıca 3Com 3CRWEASYG73 - 11g Wireless LAN Outdoor için: Veri Sayfası (4 sayfalar)
Sayfayı Yazdır
5
Find your New Wireless Bridge
To find your new Wireless Bridge you will need to connect the Wireless Bridge to the same physical LAN network as your
PC. By default, the Wireless Bridge will use DHCP Client mode to get an IP address from a DHCP Server. If your network
does not have a DHCP server, the Bridge uses a default IP address of 169.254.X.Y, where the X and Y is the last two bytes
of the MAC address in decimal value respectively. You can use that default IP address to configure the Wireless Bridge
through a web browser directly.
To find your new Wireless Bridge, open the 3Com Wireless Infrastructure Device Manager (WIDMAN) utility. On start up,
the dialog box will look like the figure below:
Click the 'Refresh' button and the 3Com Wireless Infrastructure Device Manager (WIDMAN) utility will begin to discover
devices. After finding the new Wireless Bridge, it will list it in the list box.
Choose the Wireless Bridge in the list box, and then click the 'Configure...' button. The web browser wills pop-up, and it
will bring you to the WEB UI of the Wireless Bridge.
3Com Corporation
Page 10