FirePro Sigma XT Kurulum ve Kullanım Kılavuzu - Sayfa 14
Kontrol Paneli FirePro Sigma XT için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. FirePro Sigma XT 14 sayfaları. Conventional fire control panel with control unit for aerosol release, system isolation
Ayrıca FirePro Sigma XT için: Prosedür (4 sayfalar)
Sayfayı Yazdır8. Troubleshooting
OUTPUT UNIT X
→
FAULT
STATUS UNIT X
→
FAULT
9. Specifications
Size
Material
IP Rating
Op. Voltage
Current – Quiesant
Current – Alarm State
Sigma_XT_signs_m3.5.docx
Output Unit refers to a SIGN, this fault will be
•
Address is the same as another device in the 485 circuit
•
Power has failed to the sign.
•
RS485 signal has failed to the sign.
Status Unit refers to an LCS, this fault will be
•
Address is the same as another device in the 485 circuit
•
Power has failed to the LCS.
•
RS485 signal has failed to the LCS.
Internal Sign
195 x 300 x 50mm
1.2mm steel Epoxy c oa t
IP 40
15V to 30V DC
20 mA
140 mA
External Sign
195 x 300 x 50mm
Thermoplastic
IP 55
15V to 30V DC
20 mA
140 mA
Local Control Station
135 x 186 x 50mm
1.2mm steel Epoxy coat
IP 40
21 to 30v DC
60 mA
70 mA
Page 14 of 14