Whirlpool 857867201000 Manuel - Sayfa 31
Havalandırma Davlumbazı Whirlpool 857867201000 için çevrimiçi göz atın veya pdf Manuel indirin. Whirlpool 857867201000 36 sayfaları.
Sayfayı Yazdır
DESCRIPTION OF HOOD
1
3
2
1. Control panel.
Light
:
move the switch to the right or press the button to switch
on.
Extraction speed
:
Move the switch to the right or press the next button to
increase extraction speed (or open the electric shutter )
2. Grease filter (the number of grease filters may vary,
depending on the model).
3. Grease filter handle.
4. Lamp covers (the number and position of lamps and/or
lamp covers may vary, depending on the model).
5. Telescopic flue.
6. Air vent (Filter version only).
Grease filters:
Metal grease filters have an unlimited life
and should be washed once a month
either by hand or in a dishwasher at a
low temperature and with a short cycle.
Washing in a dishwasher can cause
grease filters to turn white, but this in no
way affects efficiency.
Removing the filter: push the spring release handle
backwards (b) then remove the filter downwards (a).
Wash the filter and leave it to dry, proceeding in reverse
order to refit it.
5019 300 01026
5
6
4
.
PL
CZ
Carbon filters (filter hoods only):
Change the carbon filter every four months.
It cannot be washed or regenerated.
Fitting or replacing the carbon filter (filter hoods only).
1. Remove the grease filters.
2.Fit the filter/s over the motor: make sure the pins R on the
manifold match the slots S, then turn clockwise until locked.
3. Refit the grease filters.
Replacing bulbs
Disconnect the appliance from the power supply.
Warning! Make sure lamps are cold before touching them.
1. Remove the clip that secures the lamp cover, then prise off
using a small screwdriver or other suitable tool.
2. Replace the burnt-out bulb. Use a 40W max (E14) bulb
only.
3. Refit the lamp cover and secure in place with the clip.
Note: the lamp can also be accessed by removing the grease
filters, but removing the lamp in this way is more difficult.
SK
H
RUS
BG
RO
GB
UKR