Whirlpool AKR473IX Kullanım ve Bakım Kılavuzu - Sayfa 8

Havalandırma Davlumbazı Whirlpool AKR473IX için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool AKR473IX 15 sayfaları.

DESCRIPTION AND USE OF HOOD

1. Control panel.

2. Grease filter.

3. Grease filter spring release handles.

4. Lighting.

5. Pull-out steam deflector.

6. Extractor unit body.

Control panel

1. Light ON/OFF button

2. Timer ON/OFF button: time-delayed switch-off of the selected extraction speed (power):

Extraction speed (power) 1: 20 minutes

Extraction speed (power) 2: 15 minutes

Extraction speed (power) 3: 10 minutes

Intensive extraction speed (power): 5 minutes.

3. OFF / Extraction speed (power) decrease button

4. ON / Extraction speed (power) increase button

5. Display, shows:

a. Extraction speed (power): LEDs L1 - L2 - L3 - L4 (flashing) light up according to the selected

extraction speed (power).

Note: LED L4 - intensive extraction speed (power) works for approximately 5 minutes after which

the hood sets the intermediate speed.

b. Timer: The LED of the selected speed will flash to indicate that the timer is active.

c. Grease filter saturation: LEDs L3 and L4 flash alternately with a short time interval.

d. Active carbon filter saturation: LEDs L3 and L4 flash at the same time with a short time

interval.

Filter saturation signaling reset: Carry out filter maintenance, then press and hold button 2 until

the LEDs go out.

Note: Active carbon filter saturation is normally disabled and should only be activated if the hood is

used as a filter version (with carbon filter fitted).

To do so, proceed as follows:

- switch off the hood

- press and hold both buttons 3 and 4 until LEDs L1 and L2 briefly flash.

To turn off repeat this process, only LED L1 will briefly flash.

GB14