Backyard Pro 554HPSQRBZ Çalıştırma Talimatları Kılavuzu - Sayfa 9
Veranda Isıtıcı Backyard Pro 554HPSQRBZ için çevrimiçi göz atın veya pdf Çalıştırma Talimatları Kılavuzu indirin. Backyard Pro 554HPSQRBZ 18 sayfaları. Tower patio heater
Sayfayı Yazdır
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
7. Carefully install the glass tube (E) by lifting
7. Carefully install the glass tube (E) by
up and inserting through the center hole in
lifting up and inserting through the
the upper plate. Ensure the rubber ring(GG)
center hole in the upper plate. Ensure
is attached to the lower edge of the glass tube
as illustrated. Slide the glass tube through the
the rubber ring (GG) is attached to
hole of the lower plate cover and onto the
the lower edge of the glass tube as
middle plate. Check and ensure that
illustrated. Slide the glass tube through
the glass tube is positioned properly and is
the hole of the lower plate cover and
completely covering the center hole of the
onto the middle plate. Check and
middle plate.
ensure that the glass tube is positioned
properly and is completely covering
the center hole of the middle plate.
WARNING! The rubber
ring must be in place
WARNING! The rubber
prior to operating the heater.
ring must be in place prior
to operating the heater.
8. Attach the wire guards (D) onto the
8. Attach the wire guards(D) onto the heater
heater by inserting the hooks into
by inserting the hooks into the holes on the
the holes on the frame (ensure that
frame, (ensure that all of the hooks engage).
Unscrew 4pcs screws from damper
all of the hooks engage). Unscrew
Using the (M3/16) screws secure the guards
4pcs screws from damper using the
in place by fastening the fixing brackets (BB)
(M3/16) screws, secure the guards
to the top of the upper plate and over top of
in place by fastening the fixing
the guards as illustrated. Repeat this
brackets (BB) to the top of the upper
procedure until all guards are installed.
plate and over top of the guards as
illustrated. Repeat this procedure
until all guards are installed.
7
E
8
D
BB
9
To aid in installation
place rubber
ring(GG) on the
middle plate and
then install glass tube.
Ensure the rim of
the glass tube sits
firmly in the rubber
ring.
GG
9