Clarigo C11 Kullanıcı Kılavuzu

Barkod okuyucu Clarigo C11 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Clarigo C11 2 sayfaları.

Sayfayı Yazdır
with USB Interface
Make the barcode label as flat as possible when it is distorted.
The C11 scanner may not read labels under direct sunshine or in
extremely bright places.
It is possible to read barcodes that are upside down.
It is possible to read Inverse as well as Normal 1D barcodes.
If a barcode label is covered with a plastic sheet or film, remove the covering
before scanning the barcode.
When consecutively reading the same barcode twice or when the C11
scanner is set to consecutive reading mode, be sure to hold the barcode C11
scanner reading window a sufficient distance away from the barcode being
read for approximately 1 second. Then read the next barcode after the
indicator LED turns OFF.
Start Configuration
Reset to default
Firmware Version
End Configuration
<
>
C11
User's Guide