Caldertech Uniprep 7 Kullanım Talimatları Kılavuzu - Sayfa 4

Endüstriyel Ekipmanlar Caldertech Uniprep 7 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Caldertech Uniprep 7 16 sayfaları. Rotary scraping tool

Sayfayı Yazdır

Operating Instructions

02.

Uniprep 7 Rotary Scraping Tool

Safety Instructions

Read and understand the whole instruction booklet before using

the tool.

2. It is imperative that all possible precautions are made to avoid

unexpected pipe movement when the tool is being used.

3. Never use the tool on pipes that are not within the specified

dimensions.

4. The tool tip holder spring tension is factory set and MUST NOT be

tampered with, without adequate training or instruction.

5. Operatives should wear eye protection, gloves, safety headwear and

footwear when using the equipment.

6. A single scrape / pass cannot be guaranteed to provide 100%

preparation, where this is required users are advised to consider

making 2 scrapes around the pipe.

02. Safety Instructions