CalDigit Super Share Hızlı Başlangıç Kılavuzu - Sayfa 4

Anahtar CalDigit Super Share için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. CalDigit Super Share 13 sayfaları.

Thank you for choosing the CalDigit SuperShare, please use the following quick installation

instructions to setup your SuperShare Switch & Hub.

Please read the SuperShare manual thoroughly and become familiar with the product

before use.

Only use the CalDigit SuperShare in an area with cool ventilation. Make sure that the fans

are not obstructed to ensure heat dissipation. Do not leave or use the SuperShare near a

heat source such as a heater or direct sunlight.

Avoid using the SuperShare in extremely hot and cold environments as it will increase

the likelihood of premature failure. A safe temperature range is between 40F – 95F.

Avoid using the SuperShare in humid environments. Moisture and condensation can

accumulate and damage the electrical components, resulting in unit failure.

Only use the power adapter that has been supplied with the CalDigit SuperShare. An

excessive or inadequate power supply can result in unstable performance or failure.

Keep SuperShare away from liquids and moisture. Direct application of liquids on

SuperShare can result in electric shock, re hazard and damage the unit. If your

SuperShare gets wet while it is still o , do not turn it on.

Do not tamper with or try to repair SuperShare unless you are a certi ed CalDigit

technician. Doing so can result in personal injury and damage SuperShare. This will also

void your warranty. If you have any issues, contact CalDigit Technical Support.

Introduction