DIR Capsule D03WM Kullanım Kılavuzu - Sayfa 2

Saç Kurutma Makinesi DIR Capsule D03WM için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DIR Capsule D03WM 6 sayfaları.

Assembly Instruction

Installation of Wall Mount Arm

Before Installation

1. Wall

The wall must be strong enough to support the arm assembly.

2. Height

The recommended height of the wall bracket is 1840/1950mm from

the floor to the bottom of the bracket (see diagram)

3. Electric Source

An electrical power outlet must be prepared on the wall within

500mm distance from the wall bracket.

Installation of Wall Plate & Wall Bracket

1. The wall plate and wall bracket are already attached together with bolts

upon delivery. (See diagram)

2. With the supplied spanner, loosen the bolts and remove the wall plate

3. Use the wall plate as a template and drill three holes on the wall (please

refer to diagram for the correct drill positioning). The size and depth of

the holes will be in accordance with the bolts supplied.

4. Attach the wall bracket to the wall with the bolts, and then fix with the

supplied washers.

5. Attach the wall bracket to the wall plate, and then tighten with bolts.

Caution! As the wall plate and wall bracket are subject to a large load,

please make sure that the wall plate is installed correctly and securely.

Do not remove stopper on arm until the machine head is correctly

installed. The arm assembly is spring loaded and could cause damage

to equipment and customers if not handled correctly.

1470mm

1630mm

Washer

Wall plate

Wall bracket

Wall

Nut

Bolt

Wall plate

Bolt

50mm

Bolt

Wall bracket