DIR Chale P02 Kullanım Kılavuzu - Sayfa 13

Saç Kurutma Makinesi DIR Chale P02 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DIR Chale P02 18 sayfaları.

DIR

ASSEMBLY INSTRUCTIONS

www.dirsalonfurniture.uk

Operation Order

1. Set the machine at the correct position.

If the circular heater is not at the correct position then the hair processor will not perform at is optimum performance.

2. Turn on the Power Switch

After one minute of turning on the power, the temperature indicator light and the time digital display will illuminate

3. Select a Program

Choose di erent programs according to the customer's requirements.

The program selected will illuminate and the setting time and temperature will also be shown.

After starting and during the operation, the time and temperature can be altered.

4. Start/Stop Key

After starting, press this key, the circular heater starts rotation and all indicators will illuminate; including the indicator light,

power indicator and the selected program light.

During operation, press this key, the circular heater will stop heating and rotation immediately.

5. During Operation

During operation the time digital display shows the remaining time. The radix point will coruscate at a frequency of one second

alternation

During operation, the time and temperature can be alternated.

Press the Start/Stop key to stop operation, you can change to another program and begin next treatment.

6. Time Up

When the treatment time is over, the timer will show as "0" the electronic beep will sound and it will stop heating; however, the

circular heater will take a little longer to come to a full stop, after two minutes of cooling time the machine will sound again and

the circular heater will stop rotation.

7. Turn o the Power Switch After Finishing Work