ALcom ADT1047 Kullanıcı Kılavuzu - Sayfa 2

Telsiz Telefon ALcom ADT1047 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ALcom ADT1047 2 sayfaları. Digital cordless telephone

Sayfayı Yazdır
4.
PRIVATE PHONEBOOK
2
Your phone can store up to 10
private phonebook entries with names and
numbers. Each phonebook entry can have a maximum of 20 digits for the
phone number and 12 characters for the name. You can also select
different ringtones for your phonebook entries. Phonebook entries are
stored alphabetically by name.
4.1
Add a New Phonebook Entry
In idle:
B
1.
Press
to access the phonebook.
OR
O
+
-
•
Press
and
/
to select PHONEBOOK main menu item and then
O
press
to access the phonebook.
O
2.
Press
to select ADD.
O
3.
Press
to enter the name.
O
4.
Press
to enter the number.
O
+
-
5.
Press
and
/
to select the desired ringtone for your phonebook
entry.
O
6.
Press
to store the phonebook entry.
4.2
Search a Phonebook Entry
In idle:
B
1.
Press
to access the phonebook.
2.
Enter the first character of the name by multi-tap.
4.3
View a Phonebook Entry
In idle:
B
1.
Press
to access the phonebook.
+
-
2.
Press
/
to select the desired phonebook entry.
O
+
-
3.
Press
and
/
to select VIEW.
O
+
-
4.
Press
and
/
to review the name, number and melody of the
selected phonebook entry.
Note:
O
C
If number is more than 12 digits, press
or
to view the remaining
digits.
4.4
Edit a Phonebook Entry
In idle:
B
1.
Press
to access the phonebook.
+
-
2.
Press
/
to select the desired phonebook entry.
O
+
-
3.
Press
and
/
to select EDIT.
O
4.
Press
and the current contents of the selected phonebook entry
displays.
2
EEPROM size dependent
12
O
5.
Edit the name and press
.
O
6.
Edit the number and press
+
-
O
7.
Press
/
to select the ringtone and press
to confirm.
4.5
Delete a Phonebook Entry
In idle:
B
1.
Press
to access the phonebook.
+
-
2.
Press
/
to select the desired phonebook entry.
O
+
-
3.
Press
and
/
to select DELETE.
O
4.
Press
to confirm.
4.6
Delete the Entire Private Phonebook
B
1.
Press
to access the phonebook.
O
+
-
2.
Press
and
/
to select DELETE ALL.
O
3.
Press
to confirm.
O
4.
Press
to re-confirm.
5.
CALLER DISPLAY (NETWORK
DEPENDENT)
This feature is available if you have subscribed the Caller Line Identification
service with your network service provider. Your phone can store up to 10
received calls with date/time information in the Call List. The number will be
shown on the LCD when the phone is ringing. If the number matches with
one of the entries in your Private Phonebook, the caller's name stored in
the private phonebook will be displayed alternatively with the number. The
handset will ring with the melody associated with that phonebook entry.
If the caller number is disabled to send caller information, "WITHHELD" will
display.
If the caller number is not provided, "OUT OF AREA" will display.
In standby, if three unanswered calls are received, "3 NEW CALLS" will be
displayed.
5.1
View the Call List
All received calls are saved in Call List with the latest call putting at the top
of the list. When the call list is full, the oldest call will be replaced by a new
call. The unanswered call which has not been read is marked with a
icon at the centre of the bottom line of the display.
+
1.
Press
to access the call list.
OR
O
+
-
•
Press
and
/
to select CALL LIST.
+
-
2.
Press
/
to select the desired entry.
#
3.
Press
to view the caller's number if applicable.
3
EEPROM size dependent
13
5.2
Store a Call List Number into the Phonebook
1.
Follow Steps 1 and 2 in Section 5.1.
O
+
-
2.
Press
and
/
to select ADD TO PB.
O
3.
Press
to enter the name.
O
4.
Press
and the selected call list number is displayed.
5.
Edit the number if necessary.
O
+
-
6.
Press
and
/
to select the melody.
O
7.
Press
to confirm.
5.3
Delete an entry in the Call List
1.
Follow Steps 1 and 2 in Section 5.1.
O
+
-
2.
Press
and
/
to select DELETE.
O
3.
Press
to confirm.
5.4
Delete the entire list of the Call List
1.
Follow Steps 1 and 2 in Section 5.1.
O
+
-
2.
Press
and
/
to select DELETE ALL.
O
3.
Press
to confirm.
O
4.
Press
to re-confirm.
5.5
View the Details of the Call List Entry
1.
Follow Steps 1 and 2 in Section 5.1.
O
+
-
2.
Press
and
/
to select DETAILS.
O
3.
Press
to display the date and time of the selected call list entry.
O
4.
Press
to go back to previous screen.
14
6.
VOICE MAIL (NETWORK
DEPENDENT)
Voice Mail Waiting Indication (VMWI)
is an indication given to you
when a new voice mail message is waiting on the network service provider.
This feature should be supported by your network service provider.
6.1
Access Voice Mail Messages
This feature should be supported by your network service provider.
will display and the VMWI entry is stored in the Call List when you
have new message in your voice mailbox.
O
+
-
1.
Press
and
/
to select CALL LIST.
OR
+
•
Press
in idle to access the call list.
+
-
2.
Press
/
to select the desired VMWI entry.
(
3.
Press
to dial out to the voice mail server.
Note:
If a more recent VMWI entry is received from the same network server
number of an existing VMWI entry, the new VMWI will not be stored but the
date/time of the VMWI will be updated on the existing VMWI entry. After
you have accessed to all new voice mail messages, VMWI will turn off
automatically. When the call list is full, the new VMWI entry will replace the
oldest non-VMWI entry in the call list.
6.2
Delete VMWI Entries
To delete a single VMWI entry from the call list:
O
+
-
1.
Press
and
/
to select CALL LIST.
OR
+
•
Press
in idle to access the call list.
+
-
2.
Press
/
to select the desired VMWI entry.
O
+
-
3.
Press
and
/
to select DELETE.
O
4.
Press
to confirm.
To delete all VMWI entries from the call list:
To delete a single VMWI entry from the call list:
O
+
-
1.
Press
and
/
to select CALL LIST.
OR
+
•
Press
in idle to access the call list.
4
2.
Press and hold
to delete all VMWI entries.
3.
The
will disappear.
Note:
If you choose DELETE ALL function in the call list, the handset will also
delete all VMWI entries and CID entries.
15
7.
PHONE SETTINGS
Your phone comes with a selection of settings that you can change to
personalize your phone the way you like it to work.
7.1
Date and Time Settings
You will need to set the correct time and date so that you know when you
received call list entries. If you had subscribed for Caller ID service, when
you receive a first call, time and date will be auto updated in the handset
(only for FSK Caller ID signal).
7.1.1
Change the Date Format
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select DATE & TIME.
O
+
-
3.
Press
and
/
to select DATE FORMAT.
+
-
4.
Press
/
to select your desired date format (DD-MM-YY or MM-DD-YY).
O
5.
Press
to confirm.
7.1.2
Change the Time Format
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select DATE & TIME.
O
+
-
3.
Press
and
/
to select TIME FORMAT.
+
-
4.
Press
/
to select your desired time format (12 HR or 24 HR).
O
5.
Press
to confirm.
3
7.1.3
Set the Time
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select DATE & TIME.
O
+
-
3.
Press
and
/
to select SET TIME.
O
4.
Press
to enter the time information. The time entered will be in the
format you set in Section 7.1.2.
O
5.
Press
to confirm.
Note:
If time has been set before, the current time will display, otherwise,
"HH:MM" will display.
7.1.4
Set the Date
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select DATE & TIME.
O
+
-
3.
Press
and
/
to select SET DATE.
O
4.
Press
to enter the date information. The date entered will be in the
format you set in Section 7.1.1.
O
5.
Press
to confirm.
Note:
If date has been set before, the current date will display, otherwise,
"DD-MM-YY" will display.
16
7.2
Alarm Settings
You can use this phone to set an alarm clock. When an alarm is set, the
displays on the LCD. When the alarm time is reached, the
ON" flash on the LCD ringing with the alarm melody for a duration of 45
seconds. You can press any key to disable the alarm. If snooze function is
activated, the alarm will sound again at the end of the snooze period of
seven minutes.
7.2.1
Turn on/off the Alarm
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select ALARM.
O
+
-
3.
Press
and
/
to select ON/OFF.
O
4.
Press
to confirm.
Note:
If ON is selected, you will be asked to set the alarm time.
7.2.2
Set the Alarm Time (if the Alarm is set to be ON)
1.
Follow Steps 1 to 4 in Section 7.2.1.
2.
Enter the alarm time.
O
3.
Press
to set the snooze function.
O
+
-
4.
Press
and
/
to select ON or OFF.
O
5.
Press
to confirm.
7.3
Handset Settings
7.3.1
Set the Ringer Melody for Internal Calls
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select RING SETUP.
O
+
-
3.
Press
and
/
to select INT RING.
O
+
-
4.
Press
and
/
to select the desired ringer melody (a total of 5
melodies for your selection) for setting ringer melody for internal calls.
Note:
The respective ringer melody will be played while browsing the melody list.
O
5.
Press
to confirm.
7.3.2
Set the Ringer Volume
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select RING SETUP.
O
+
-
3.
Press
and
/
to select RING VOLUME.
O
+
-
4.
Press
and
/
to select the desired ringer volume (a total of 6
ringer volume levels including VOLUME OFF).
Note:
The respective ringer volume will be played during your selection.
If VOLUME OFF is selected,
icon will display.
O
5.
Press
to confirm.
17
7.3.3
Set Alert Tones
A single beep is emitted when you press a key. You can turn on or off the
key tone. You can also turn on the alert tones when low battery and out of
range are detected. Low battery tone will be emitted while you are talking
with the phone to alert you that you need to charge up your battery.
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select TONE SETUP.
O
+
-
3.
Press
and
/
to select KEY TONE / BATTERY TONE / OUT OF
RANGE.
O
+
-
4.
Press
and
/
to turn on or off these tones.
O
5.
Press
to confirm.
7.3.4
Set the Handset Language
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select LANGUAGE.
O
+
-
3.
Press
and
/
to select the desired language.
O
4.
Press
to confirm.
7.3.5
Rename the Handset
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select RENAME HS.
O
3.
Press
and enter the name of your handset.
O
4.
Press
to confirm.
7.3.6
Choose the Information to be displayed in idle
You can choose to display time or handset name in your idle screen.
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select HS DISPLAY.
O
+
-
3.
Press
and
/
to select HANDSET NAME or TIME.
O
4.
Press
to confirm.
7.3.7
Set the Auto Answer
If you turn on the Auto Answer, you can pick up the call from the cradle
without pressing any key.
O
+
-
1.
Press
and
/
to select HS SETTINGS.
O
+
-
2.
Press
and
/
to select AUTO ANSWER.
O
+
-
3.
Press
and
/
to turn on or off the auto answer feature.
O
4.
Press
to confirm.
18
7.4
Base Settings
The current settings are marked an asterisk which is displayed at the
rightmost of the menu item.
7.4.1
De-register a Handset
You are requested to enter the 4-digit PIN in order to de-register a handset
from the base station. The antenna icon on the de-registered handset will blink.
Note:
You cannot de-register the handset that you are currently using.
O
+
-
1.
Press
and
/
to select BS SETTINGS.
O
+
-
2.
Press
and
/
to select DELETE HS.
O
3.
Press
and you are requested to enter the 4-digit system PIN.
4.
Enter the 4-digit system PIN. (The default system PIN code is 0000)
O
5.
Press
and a list of registered handsets is displayed.
+
-
6.
Press
/
to select one of the handsets that you want to de-register.
O
7.
Press
to confirm.
7.4.2
Change the dial mode
O
+
-
1.
Press
and
/
to select BS SETTINGS.
O
+
-
2.
Press
and
/
to select DIAL MODE.
O
+
-
3.
Press
and
/
to select TONE or PULSE.
O
4.
Press
to confirm.
7.4.3
Change the Flash Time
The flash time settings is country dependent. Please contact your local
service provider for the correct settings.
O
+
-
1.
Press
and
/
to select BS SETTINGS.
O
+
-
2.
Press
and
/
to select FLASH TIME.
O
+
-
3.
Press
and
/
to select your desired flash time (SHORT,
MEDIUM, LONG).
O
4.
Press
to confirm.
7.4.4
Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the
base station. It is used to protect your phone against unauthorized use.
The default system PIN code is 0000.
O
+
-
1.
Press
and
/
to select BS SETTINGS.
O
+
-
2.
Press
and
/
to select CHANGE PIN.
O
3.
Press
and you are requested to enter the 4-digit system PIN.
4.
Enter the old system PIN.
O
5.
Press
and enter the new system PIN.
O
6.
Press
and enter the new system PIN again.
Note:
If the new PIN entered in Step 6 is not matched with the new system PIN
entered in Step 5, user is requested to enter the valid system PIN again in
Step 5.
O
7.
Press
to confirm.
19
7.5
Registration
Your handset and base station is pre-registered. Up to five handsets can be
and "ALARM
registered to a single base station.
If for some reason, the handset is not registered to the base station (
flashes even when the handset is near the base station), register your
handset according to the following procedure.
P
1.
Press and hold
on the base station for about five seconds, the
base station is entered into registration mode.
O
+
-
2.
Press
and
/
to select REGISTRATION.
O
3.
Press
and you are requested to enter the 4-digit system PIN.
4.
Enter the 4-digit system PIN.
O
5.
Press
to confirm.
If the handset registration is successful, you will hear a confirmation tone
and the
will stop flashing. The handset will automatically be allocated
the next available handset number. This handset number is shown in the
handset display in standby mode. If the handset registration is
unsuccessful, the
will still flash.
7.6
Reset Your Phone
You can reset your phone to the default settings. After reset, all you
personal settings and call list entries will be deleted, but your phonebook
remains unchanged.
O
+
-
1.
Press
and
/
to select DEFAULT.
O
2.
Press
and you are requested to enter the 4-digit system PIN.
3.
Enter the 4-digit system PIN.
O
4.
Press
to confirm.
O
5.
Press
to re-confirm.
20
8.

TROUBLESHOOTING

If you have difficulty with your phone, please try the suggestions listed
below.
Problem
Cause
Solutions
No dialing tone
a. Telephone cord of the
a. Check that the
(
base station is not
telephone line cord
when pressing
plugged in.
has been plugged into
key.
b. The adapter cord is
the base station and
not plugged in
the phone socket.
correctly in the base
b. Check the base station
station.
DC socket and the AC
c. The line is busy, as
adaptor plug (remove
another handset is
and plug-in).
used.
c. Wait until the line is
unoccupied.
When connected
Dialing prefix is needed.
Insert the dialing prefix.
to a PABX, cannot
make outgoing
calls or call reaches
a wrong number.
"SEARCHING" is
a. Base station out of
a. Reduce the range.
range.
b. Connect base station
displayed.
b. Base station not
to mains.
connected to
mains.
c. Please register the
c. Handset out of
handset with base.
Registration with
base.
Cannot make a
Service not activated or
Check your Subscription
call.
wrong setting.
with network or change
the dial mode.
No display.
Empty battery.
Recharge battery.
Caller ID cannot
No caller ID service
Check if you have
appear.
available in the network.
subscribed for caller ID
service.
21
9.
CONFORMITY
This unit conforms to the following rules and regulations:
1995/5/EC Radio frequency and telecommunication equipment and the
mutual acceptance of conformity.
The CE mark proves the above.
Due to continuous product development all features and
specifications are subject to change without prior notice.
For more information on Warranty and Product Support please
contact:
Alcom Electronics Pte Ltd Singapore
Phone: (65) 6841 2668 Fax: (65) 6841 2628
Website: www.alcomonline.com
22
23