ALcom AT-5928 Kullanıcı Kılavuzu - Sayfa 7

Telefon ALcom AT-5928 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ALcom AT-5928 12 sayfaları. Caller id phone

Sayfayı Yazdır
SECRET CODE SETTING AND REMOTE MONITOR FUNCTION
 Setting
In on-hook state, press and hold RING key for 3 seconds, LCD displays Pin ----.
1.
Input a 4-digit of PIN using the numeric keys.
2.
Press DEL to edit the secret code, press SET to confirm.
3.
When the last digit of the secret code is #, the telephone will activate remote monitor
4.
function.
Set the ringer to OFF. (Please refer to section "SETTING RINGING TONE").
5.
 Usage
Secret code: When caller call this telephone, he/she will hear the usual ringing tone (when
1.
the line gets through) three times or four times. However, the telephone unit will not ring. The
caller will hear a short "di" sound, which means that the caller need to key in the secret code.
Once the caller keys in the correct code, the telephone unit will ring. Press H.F key or pick
up the handset to have the conversation with the caller.
Remote monitor: If the last digit of the secret code is #, after the caller keys in the correct
2.
secret code, the telephone unit will go into hands free mode automatically.
If the caller keys in the wrong code, he/she will have to call again and key in the correct
3.
secret code PIN.
NOTE: This function is useful only when the telephone ringer is set to OFF. The caller must
know the secret code in order to dial through the line.
INTERCOM AND TRANSFER BETWEEN PARALLEL PHONES
 Setting paging number
In on-hook state, press and hold SET key, LCD displays EL--
1.
Key in "*" and paging number(example "*1"and "*2" ), use DEL key to edit
2.
Press SET key to confirm and exit.
3.
Transferring the line from paralleled phones:
1) In on-hook state, use one of paralleled phone to call this unit. Press"*" and the paging
number that was set in another telephone unit, the unit rings. Pick up its handset or press
key to have intercom conversation. Paralleled phones can call each other by the same way.
2) When a call comes, use one of paralleled phone to answer. Press the "*" and paging number
that was set in another telephone unit, the unit rings, pick up its handset or press
answer the incoming call.
Notice: Please use same series phones to intercom and transfer as above operation.
If different phone is connected in parallel, only can transfer call from the other phone to
this phone and no intercom is possible. If the paging number is set Anti-steal dialing
function will not work. Any special services starting with "
company may not function properly. Please deactivate Intercom function to use those
special services.
*
" offered by your Telephone
7
key to