ALcom AT6085 Kullanıcı Kılavuzu - Sayfa 9

Telefon ALcom AT6085 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ALcom AT6085 12 sayfaları.

SETTING PABX CODE

1. In on-hook state, press and hold DEL key 3 seconds to set PABX code, LCD displays

SET PCODE- and the" -" flashes.

2. Press UP/+ or DOWN/- key to set PABX code from 0 to 9.

3. If choose " -", it means no PABX code has been set.

4. Press SET key to confirm and quit.

Hold music selection

There are 3 kinds of hold music for selection

1. At off-hook or hands free state, press HOLD key

2. Press OUT/X key to select the desired hold music. It plays the music at same time.

Press HOLD key to quit.

When talking over handset, press HOLD key to enter the hold mode and the hold music

is sent out. In hold mode

1. Press HOLD key to release hold mode and continue to talk over handset, or

2. Hang up handset, it enters hands-free hold mode.

When talking at hands-free mode, press HOLD key to enter the hold mode and the hold

music is sent out. In hold mode

1. Pick up handset to talk over handset, or

2. Press H.F. key to quit hold mode and talk at hands-free mode.

ONE TOUCH MEMORY OPERATION

Store the number in one-touch memory

1. Pre-dial the desired number or checking incoming and outgoing number that you want to

store.

2. Press STORE key

3. Press M1 key

Make a call from one-touch memory

In off-hook or on-hook situations, press M1 key to dial the stored number out.

Store the number in two-touch memory

1. Pre-dial the desired number or checking incoming and outgoing number that you want to

store.

2. Press STORE key

3. Press one of digit key (0-9)

Make a call from two-touch memory

In off-hook or at hands-free state, press STORE key + digit key (0-9) key, the relevant number will