Ergo PrimeCables Cab-PC-08257 Kurulum Kılavuzu - Sayfa 2

İç Mekan Mobilyaları Ergo PrimeCables Cab-PC-08257 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Ergo PrimeCables Cab-PC-08257 2 sayfaları.

Sayfayı Yazdır
Install the protective cover and lids
3
1
2
First buckle the four lids(8) into the beam of the desk
frame (2) and then into the protective cover (3)
Connect each cable to the adapter
Adapter cable to DC
interface
Motor connection M1
interface
10
1
2
1
8
2
2
3
Deduct
8
13
1
1
2
9 7
Connect the power after the wiring is completed
Cable clips (11) can be used to fix the cables
11
on the desktop to keep the cables tidy
Cable
Split it
Management
11
11
Deduct
Keep it away from children.
2
Common fault treatment
The following tips will help you detected and eliminate the common fault
and error. If the fault you met is not listed below, please contact with your
supplier. Only the manufacturer and professionals are capable for investigating
7
and correcting those fault and error.
Fault phenomenon
No response while long pressing
down arrow after connected with
a power supply
No response while pressing up
arrow/ down arrow after
9
connected with a power supply
Rising in a low speed
The motor not move as instructed
Go down but not go up
Downward sliding
Self-Reset
Overwork
（Duty cycle:Max 2min on/18min OFF）
Not enough up&down height
This marking indicates that this product should
Waste disposal
not be disposed with other household wastes.
To prevent possible harm to the environment or
Fix it
human health from uncontrolled waste disposal,
1 1
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmental safe recycling.
Attention
1. Power supply: AC100V-240V,50/60Hz
2. Service Environment: 0-40℃
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet
dishcloth when cleaning, be careful not to let the drops into the internal parts, not loose
Method
the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so
1.Check if all the cables be connected well
dispose of it in accordance with each country's environmental legislation, not the
2.Contact your supplier or dealer
general household waste.
5. Check carefully to ensure correct and complete assembly before using.
1.Check if all the cables be connected well
6. Be familiar with all functions and program settings of the product before first use.
2.Contact your supplier or dealer
7. Children are forbidden to play on the desk as the behavior is unpredictable.
Manufacturer is not responsible for loss, injury, or damage due to those improper
1
.
Check if overloaded, max loading: 40kg;
action.
2
.
Contact your supplier or dealer
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not
have any effect on the use of the equipment.
1. Contact your supplier or dealer
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure
1.Reposition
that the cleaner used will not pollute the environment.
10. This appliance can be used by children aged from 8 years and above and persons
2.Contact your supplier or dealer
with reduced physical, sensory or mental capabilities or lack of experience and
1
Check if overloaded, max loading: 40kg;
.
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
2
.
Contact your supplier or dealer
with the appliance.
1
Check if overloaded, max loading: 40kg;
.
11. Cleaning and user maintenance shall not be made by children without supervision.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service
2
.
Contact your supplier or dealer
agent or a similarly qualified person in order to avoid a hazard.
1
.
Restart after suspend for 18mins while
connecting with power;
13. Please make sure there is no hazard sources in your operating environment. e.g.,
do not litter the tools around. Always be careful to treat the packaging materials in order
2
.
Contact your supplier or dealer;
to avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
1.Perform a reset operation;
14. Keep the original package of the equipment if necessary in case of the future use in
2.Contact your supplier or dealer.
transportation.