Alcom Premium ADT1308 Kullanım Kılavuzu - Sayfa 13

Telefon Alcom Premium ADT1308 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Alcom Premium ADT1308 18 sayfaları. Telephone

DATE & TIME

The user is able to set the date and time on the handset, by selecting the following option.

Press OK key. Using ▲ or ▼ key to select DATE&TIME,

Press OK key and the last two digits of the year flashes.

Edit the year, month, date and time by pressing ▲ or ▼ key.

Press OK key to confirm the setting, and return to the DATE & TIME menu.

Notes:

1. When the unit is powered on initially, the date and time will be blinking, please to set the date and time first.

2. Date and time will be automatically set when the caller ID message is received in FSK mode.

3. Year must be set manually.

The handset can be registered to more than one base (up to a maximum of 4), and you can select which base

you want the handset to operate with.

1. Press OK key, then using ▲ or ▼ key to choose SELECT BASE.

Press OK key and the LCD displays BASE 1

(If Base unit is already linked with a Handset it will be shown with "+").

3. Press ▲ or ▼ to select base (BASE 1~4) or AUTO.

4. Press OK to begin searching, if you hear a sound of "di-du-di", means linked successful.

Note: If you select "AUTO", the handset will link with the first of the registered bases that it finds.

This function allows the user to restore the handset setting to the factory default.

1. Press OK key, then using ▲ or ▼ key select HS DEFAULT.

2. Press OK key to confirm.

3. The display shows PIN?, then key in the PIN code (default 0000).

4. Press OK key to confirm. If the PIN code is validated all handset settings will be returned to the factory

default.

Handset Menu function 5: REGISTRATION

Maximum 5 handsets can be linked to the same base and Maximum 4 bases can be linked to the same

handset by following the procedure below.

1. In standby mode, press OK key, then using ▲ or ▼ key select REGISTRATION.

2. Press OK key to enter. Press ▲ or ▼ key to select BASE from BASE1, BASE2, BASE3 or BASE 4.

3. Press OK key to confirm, LCD displays PIN? Then enter the pin code (defaulted as 0000, if input wrong

number, press R/CLR to delete).

4. When finished press OK key to confirm. LCD display SEARCHING, then press and hold

BASE UNIT until you has get DI-DU- DU- sound. The handset and base have been registered

successfully.

Notes:

If the handset fails to register with the base, it will return to standby mode.

You can repeat the above steps to register another handset for the same base, and the successfully

key in the