3Com H3C Manuel - Sayfa 11

Ağ Donanımı 3Com H3C için çevrimiçi göz atın veya pdf Manuel indirin. 3Com H3C 11 sayfaları. Loopback detection feature manual

H3C Loopback Detection Feature Manual

Release 2107

By default, the loopback port auto-shutdown function is enabled on ports if the device

boots with the default configuration file (config.def); if the device boots with null

configuration, this function is disabled.

Note:

You cannot enable both the loopback port control function (with the loopback-detection

control enable command) and the loopback port auto-shutdown function on a port. If

you do so, the function configured later will take effect.

Related command: loopback-detection enable, loopback-detection control

enable.

Example

# Enable the loopback port auto-shutdown function on port Ethernet 1/0/1.

<H3C> system-view

System View: return to User View with Ctrl+Z.

[H3C] loopback-detection enable

[H3C] interface ethernet 1/0/1

[H3C-Ethernet1/0/1] loopback-detection shutdown enable

Chapter 2 Loopback Detection Configuration

2-7

Commands