Clarion DB258R Kullanıcı El Kitabı - Sayfa 7

Araba Stereo Sistemi Clarion DB258R için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Clarion DB258R 17 sayfaları. Clarion cd receiver owner's manual
Ayrıca Clarion DB258R için: Kullanıcı El Kitabı (2 sayfalar), (Fransızca) Mode D'emploi (18 sayfalar)

Sayfayı Yazdır

5. OPERATIONS

Basic Operations

CAUTION

Be sure to lower the volume before switching

off the unit power or the ignition key. The unit

remembers its last volume setting. If you

switch the power off with the volume up, when

you switch the power back on, the sudden loud

volume may hurt your hearing and damage the

unit.

Turning on/off the power

Note:

• Be careful about using this unit for a long time with-

out running the engine. If you drain the car's bat-

tery too far, you may not be able to start the engine

and this can reduce the service life of the battery.

1. Press the [ SRC ] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the [ SRC ] button for 1 second

or longer to turn off the power for the unit.

Selecting a mode

1. Press the [ SRC ] button to change the opera-

tion mode.

2. Each time you press the [ SRC ] button, the op-

eration mode changes in the following order:

Radio mode

CD mode

Note:

• If the CD mode is selected when no disc is inserted,

the display shows "NO DISC".

Adjusting the volume

Turning the [ ROTARY ] knob clockwise increases

the volume; turning it counterclockwise decreases

the volume.

∗ The volume level is from 0 ( minimum ) to 33 ( maxi

mum ) .

Note:Be sure to read this chapter referring to the front diagrams of

chapter "2. CONTROLS" on page 5 (unfold).

Setting the Z-Enhancer

This unit are provided with 3 types of sound tone ef-

fects stored in memory. Select the one you prefer.

∗ The factory default setting is Z-EHCR OFF.

Each time you press the [ Z ] button, the tone ef-

fect changes in the following order:

Z-ENHANCER 1

HANCER 3

1...

• Z-ENHANCER 1 : bass emphasized

• Z-ENHANCER 2 : treble emphasized

• Z-ENHANCER 3 : bass and treble emphasized

• Z-EHCR OFF

Audio mode adjustments

1. Press the [ A-M ] button to select the adjustment

BASS

∗ When the Z-Enhancer function is turned on, BASS

2. Turning the [ ROTARY ] knob to adjust the

BASS ( Bass ) : Adjustment range: -7 to +7

TREB ( Treble ) : Adjustment range: -7 to +7

BAL ( Balance ) : Adjustment range: L13 to R 13

FAD ( Fader )

Radio mode...

3. When the adjustment is complete, press the

Z-ENHANCER 2

Z-EHCR OFF

: no sound effect

mode. The mode switches as follows each time

the [ A-M ] button is pressed:

TREB

BAL

( Bass ) and TREB ( Treble ) cannot be selected.

selected audio mode.

: Adjustment range: F12 to R12

[ A-M ] button several times until the function.

Z-EN-

Z-ENHANCER

FAD

Previous mode

DB258R