ERGO-INNOVATE EI6152 Kullanım Kılavuzu - Sayfa 9

Raflar ve Standlar ERGO-INNOVATE EI6152 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ERGO-INNOVATE EI6152 12 sayfaları. Medium full-motion tv wall mount

Sayfayı Yazdır

Step 2B Solid Concrete or Concrete Block Option

WARNING:

Avoid potential personal injury or property damage! DO NOT over-tighten the

lag screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are

pulled ﬁrmly against the arm assembly/wall plate [01].

Ensure the arm assembly/wall plate is securely fastened to

the wall before continuing to the next step.

● Mount the arm assembly/wall plate [01] directly onto the concrete

surface

● Anything covering the wall must not exceed 5/8 in. (16 mm)

● Minimum solid concrete thickness: 203 mm (8 in.)

● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)

● Never drill into the mortar between blocks

2B-1

2B-2

HEAVY! You may need

assistance with this step.

Position the arm assembly/wall

plate at your desired height,

level the arm assembly/wall

plate and mark the pilot hole

locations.

Drill 4 pilot holes using a 3/8 in.

(10mm) diameter drill bit. Make

sure the depth is not less than 2

3/4 in. (70mm). Never drill into

the mortar between blocks.

Wall

Anchor

2 3/4 in. (70mm)

ø3/8 in. (10mm)