ERGO-INNOVATE EI6141 Kullanım Kılavuzu - Sayfa 7

TV Montajı ERGO-INNOVATE EI6141 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ERGO-INNOVATE EI6141 12 sayfaları. Tilt wall mount

Step 2 Attach the Wall Plate [01] to Wall

For wood stud installation, follow STEP 2A

For concrete installation, follow STEP 2B

Step 2A Wood Stud Option

WARNING:

Avoid potential personal injury or property damage! DO NOT over-tighten

the lag screws [A1]. Tighten the lag screws [A1] only until the washers

[A2] are pulled ﬁrmly against the wall plate [01].

DO NOT USE ANCHOR [A3] FOR THIS STEP

Ensure the wall plate is securely fastened to the wall before

continuing to the next step.

● Any material covering the wall must not exceed 5/8 in. (16 mm)

● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm)

minimum 1 1/2 x 3 1/2in. (38 x 89 mm)

● Stud center must be veriﬁed

2A-1

Use a stud ﬁnder (not included)

to locate wood studs or use an

awl (not included) to verify the

edges. Mark the edge and

center locations.

Wall

Anchor

awl

(Not lncluded)