AlcoSense Elite 3 Kullanıcı Kılavuzu - Sayfa 2

Buharlaştırıcılar AlcoSense Elite 3 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AlcoSense Elite 3 10 sayfaları. Fuel cell breathalyzer

Sayfayı Yazdır

Congratulations on buying your new AlcoSense

breathalyser.

We hope you enjoy owning your AlcoSense

breathalyser. If you have any questions regarding the unit

or want to speak with us further, please visit

alcosense.com.au or call 1300 800 200 (between 9am and

5pm Monday to Friday).

Operating Instructions

Normal Mode

Step 1: Insert mouthpiece into mouthpiece slot, then press

the power button.

Step 2: The breathalyser will start to warm up until it

shows the "0" sign.

Step 3: Blow into the mouthpiece for 4 seconds or until you

hear the unit "click".

Step 4: The result will be displayed for 10 seconds.

Readings over 0.200%BAC will be displayed as 'OL'.

Fast Mode

Use this mode for fast testing to detect the presence or

absence of alcohol.

Complete steps 1-2 above. Then, blow gently through the

mouthpiece and press the button while blowing.

The result will be displayed as either 'P' when alcohol level

detected is less than 0.020%BAC or 'F' when alcohol level

detected is more than 0.020%BAC.

Please note:

• The device will turn off automatically when not in use.

• With the power off, press and hold down the power

button to view the number of tests after calibration "C"

and the number of tests where alcohol was detected "A".

Elite 3