AerAtron E502 Kullanım Kılavuzu & Teknik Özellikler - Sayfa 13

Fan AerAtron E502 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu & Teknik Özellikler indirin. AerAtron E502 20 sayfaları.

AerAtron >> Silent Efficiency

Remote Control Set‐up

Code match your transmitter and receiver

Note: receiver itself does not need to set DIP switch

Speed

Up 1‐2‐3‐4‐5‐6

Down 6‐5‐4‐3‐2‐1

To start the fan press speed button

To change speed of fan press or (indicated by a short buzzer sound)

LCD indicates maximal speed (max)

On/Off

Press the button to start or switch off the fan

Forward

For cooling effect and in combination with Air Condition System

Reverse

To support heating system to exchange temperature

Code match for Transmitter (Hand held) and Receiver

1. Set the code to be encoded by the Dip Switch of transmitter

2. Switch on the main power to activate the receiver

3. Within 3 minutes after the power is turned on, press the transmitter's "ON/OFF" key and do

not release for 5 seconds

4. Receiver issues four (beep) short sounds which indicates successful code match

5. After successful code match, the fan automatically returns to the original speed as indicated

on LCD screen

6. Press any transmitter button to check for proper functioning

7. For code changes, repeat steps 1 to 6

The transmitter and receiver will memorise the code for future use (also if switched off).

IF THERE ARE ANY PROBLEMS DURING INSTALLATION OF THE FAN, THE INSTALLER MUST CONTACT THE AERATRON

HELP LINE BEFORE LEAVING THE SITE: SWISS PRECISION +61 410 465 228

Installation - Operation – Maintenance - Warranty

Remote Control Code Setting

Set your Dip Switch to control individual

fan(s) (one per fan handset) or chose same

code setting for up to 16 fans within a 7m

radius