AerAtron FQ3 Kullanım Kılavuzu & Kurulum Kılavuzu - Sayfa 8

Fan AerAtron FQ3 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu & Kurulum Kılavuzu indirin. AerAtron FQ3 18 sayfaları.

Pairing the Remote Control

STEP 6

Pairing a Single Fan per remote control: LEARN MODE

NOTE: Blades must be attached prior to testing the fan

1. On Receiver: Verify that the "Learn" switch is in the "O" position

2. Slide battery cover to unlock - Locate the LEARN BUTTON &

insert batteries.

3. Switch on the main power to activate the receiver, indicated

by one beep. (Energise one fan reciever at a atime).

4. Within 60 seconds after the power is turned on (one beep),

press and hold the LEARN button on the Remote Control

(min. 3 secs.) until Fan Receiver issues three 'beeps' which

indicates successful pairing.

5. On Receiver: switch the "Learn" switch to "X" (this will

lock the pairing code with the remote)

6. Finish STEP 7, 8 & 9 and press ON/SPEED button to test

fan functions.

7. To re-pair, repeat steps 3 to 5

NOTE: Power must be oﬀ for 10 seconds min. before repairing.

The Remote Control and Fan Receiver will memorise the pairing

code for future use even if mains power is switched oﬀ.

LIGHT SWITCH: Select ON/OFF or DIMMING for the light function.

(Light will maintain last setting if turned oﬀ)

Pairing multiple fans per remote control.

One remote control can control up to 8 fans (within a 7m (23") radius).On ALL receivers verify

that the "Learn" switch is in the "O" position. Switch on the mains power to activate ALL

receivers at the same time, indicated by one 'beep'. Within 60 seconds, press and hold the

LEARN button on the remote control (min. 3 seconds) until fan receiver issues three 'beeps'.

The remote control is pre-programmed

No pairing with the receiver required

Controlling the Fan

1. Fan OFF

2. Fan ON & Speed 1-6

3. Forward / Reverse

Use Forward mode (counterclockwise) for cooling

Use Reverse mode (clockwise) to circulate warm air

4. Timer 2, 4 & 8hrs

5. Light ON/OFF

To DIM, press and HOLD light button

to cycle from bright to dark.

(LIGHT SWITCH at DIMMING position)

6. Breeze/Cycle through speeds randomly

LIGHT SWITCH

'LEARN' BUTTON

O LIGHT DIMMING

| LIGHT ON/OFF