3Com OfficeConnect WXR100 Hızlı Başlangıç Kılavuzu - Sayfa 3
Ağ Donanımı 3Com OfficeConnect WXR100 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 3Com OfficeConnect WXR100 10 sayfaları. Secure converged networks enterprise edition
Ayrıca 3Com OfficeConnect WXR100 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Ürün Kılavuzu (15 sayfalar)
Sayfayı Yazdır
Select 3WXM Services > Setup from the menu bar
3
in the main 3WXM window. A browser window
containing the Setup page appears.
If a certificate check dialog appears, click Accept or
OK to accept the certificate.
Select WX Connection Settings in the column on
4
the left.
Select Accept Self-signed Certificates, in the
5
Connection Security area.
Click Save.
6
Open the network plan for the site, or create a new
7
one.
To create a new network plan, select Plan
Management and New Plan on the server (in the
browser window).
Access the Create Wireless Switch Wizard:
8
Select the Configuration tool bar option.
a
In the Organizer panel, select the network plan
b
name.
In the Task List panel, select Create Wireless
c
Switch.
Enter a name for the switch in the WX Name box.
9
Select the switch model.
10
Enter the serial number in the Serial Number box.
11
Configure other parameters as required for the
12
switch's deployment.
Remotely Configuring a Switch Using 3WXM (any model)
You can configure an enabled password for the switch
even if it does not already have one. When sending the
configuration, 3WXM tries the configured password
first, then tries a blank password if the enabled
password does not match the one on the switch. If the
switch does not have an enabled password, the blank
password is accepted. 3WXM then sends the
configuration to the switch, including the configured
(non-blank) enabled password.
Click Finish to save the switch configuration and
13
close the wizard.
Leave 3WXM Services running, with the network plan
open. When the switch is powered on at the remote site
(and the Fn switch is pressed, if a WXR100), the switch
uses its DHCP client to obtain an IP address, then contacts
3WXM Services to request a configuration.
Install the Switch and MAPs and Press the Fn Switch
(WXR100 only)
Drop ship configuration requires a DHCP server at the
remote office. The WXR100 uses the DHCP server to
obtain an IP configuration in order to communicate
with 3WXM Services in the corporate network. The
drop ship option also requires an entry in the local
DNS server that maps the hostname wlan-config-srv
to 3WXM Service's IP address.
Add an entry to the local DNS server that maps the host-
1
name wlan-config-srv to the IP address of 3WXM Ser-
vices. Include the corporate network's domain name in
the entry (for example, wlan-config-srv.example.com).
Connect WXR100 port 1 to the network.
2
3