Xerox 2101 Kullanıcı Kılavuzu - Sayfa 10

Yazıcı Xerox 2101 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox 2101 22 sayfaları. Digital copier/printer
Ayrıca Xerox 2101 için: Müşteri Sürüm Notları (14 sayfalar), Başlangıç Kılavuzu (12 sayfalar)

Sayfayı Yazdır
Xerox 2101 Kullanıcı Kılavuzu
1.2 Switching On/Off Power
1.2.3
Auto Start
While waiting for the machine to warm up after the power is switched on, you can press the Start
button to program copying. This feature is called Auto Start.
■
Enabling Auto Start
To use the Auto Start feature, load the document, specify the desired settings and then press the Start
button.
The message "Please wait ... The job will start automatically." will be displayed and copying will begin
automatically once the machine has entered the Ready to Copy mode.
● If you have set the machine ready tone in Tools Mode, you will hear the tone when the machine has warmed up and is ready to
accept copy jobs. You can then proceed to set an Auto Start job after the tone. To set the machine ready tone or change its tone
volume, refer to "8.3 Setting Tools Mode".
Auto Start screen: When an A4 document is placed on the document
glass and three sets are to be made with no change in size.
■
Canceling Auto Start
To cancel an Auto Start job, select Stop on the screen or press the Stop button on the control panel
before the document is scanned.
Then press the C button and the Auto Start job will be canceled.
10