Xerox 5400DX - Phaser B/W Laser Printer Manuel - Sayfa 6
Yazıcı Xerox 5400DX - Phaser B/W Laser Printer için çevrimiçi göz atın veya pdf Manuel indirin. Xerox 5400DX - Phaser B/W Laser Printer 11 sayfaları. 1000-sheet stacker
Ayrıca Xerox 5400DX - Phaser B/W Laser Printer için: Hızlı Kurulum Kılavuzu (40 sayfalar), Teknik Talimatlar (5 sayfalar), Kurulum Talimatları (2 sayfalar), Kağıt El Kitabı (2 sayfalar)
Sayfayı Yazdır
10. Clean the PCR contacts with a cotton swab and alcohol.
12. Install the drum, axle pins, and screws. Make sure that the metal axle pin is on the double gear side, and the white plastic
pin is on the single gear side. Although the toner hopper can be cleaned and filled through the fill plug, it is recommended that
the magnetic roller be removed and cleaned. This will also be necessary to do once a seal is available. The fill plug has a black
cover in the center that is held on by double sided tape. This cover is actually the chip, which must be replaced for the cartridge
to work.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
11. Clean the PCR with your preferred PCR cleaner and install
in the holders.
www.uninetimaging.com