Xerox 83 Series Kullanıcı Kılavuzu - Sayfa 25

Yazıcı Xerox 83 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox 83 Series 44 sayfaları. Wide format printer
Ayrıca Xerox 83 Series için: İpuçları ve Tavsiyeler Kılavuzu (8 sayfalar)

Sayfayı Yazdır
Xerox 83 Series Kullanıcı Kılavuzu
Check if the edges of the loop are aligned on each other.
Step 4 :
Raise the pressure rollers. Slide the end of the strip (1) under the pressure rollers (4) and move
Step 5 :
it to position 1 as shown on the picture below. Lower the pressure rollers.
Go to the FRONT SIDE of the printer.
Step 6 :
Carefully pull the strip to create some tension.
Step 7 :
Caution
•
Don't pull too hard on the strip. This will loosen the tape, resulting in the fact that the loop
becomes longer, leading to a bad calibration check.
•
Make sure that you have an equal tension on the left and right of the strip.
No
Description
1
Synthetic paper strip
2
Paper loop
3
Tensioning bars
4
Pressure rollers
3-11