Xerox PHASER 6250 Ayar Talimatları Kılavuzu

Yazıcı Xerox PHASER 6250 için çevrimiçi göz atın veya pdf Ayar Talimatları Kılavuzu indirin. Xerox PHASER 6250 9 sayfaları. Color, laser, toner cartridge with chip
Ayrıca Xerox PHASER 6250 için: Seçenekler Kılavuzu (3 sayfalar), Manuallines (6 sayfalar), Ağ Kılavuzu (7 sayfalar), Bakım (3 sayfalar), Tamamlayıcı Kılavuz (5 sayfalar), Hızlı Referans Kılavuzu (11 sayfalar), Yazılım Kılavuzu (5 sayfalar), Yazılım Kılavuzu (5 sayfalar), Manuel (8 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (23 sayfalar), Referans Kılavuzu (11 sayfalar), Rekabetçi Karşılaştırma (2 sayfalar), Ayarlar Kılavuzu (4 sayfalar), Yönetim Kılavuzu (2 sayfalar), Yazılım Kılavuzu (2 sayfalar), Bakım Talimatları (4 sayfalar), Hızlı Referans Kılavuzu (11 sayfalar), Referans Kılavuzu (9 sayfalar), Kartuş Yeniden Üretim Talimatları (9 sayfalar), Manuel (39 sayfalar), Hızlı Referans Kılavuzu (11 sayfalar)

Xerox PHASER 6250 Ayar Talimatları Kılavuzu

Printer Settings

This topic includes:
"Accessing the Startup Page" on page 1-14
"Accessing Power Saver" on page 1-15
"Accessing Intelligent Ready Mode" on page 1-15
"Accessing Protected Mode" on page 1-16
"Accessing Load Paper Timeout" on page 1-17
"Selecting Tray Settings" on page 1-17
"Adjusting Front Panel Brightness" on page 1-20
"Adjusting Front Panel Contrast" on page 1-20
"Changing Printer Language" on page 1-21

Accessing the Startup Page

The printer automatically produces a "Startup Page" each time the printer is turned on or reset.
You can turn off the automatic printing of the "Startup Page" and later print it from the
information pages menu.
To turn on/off the "Startup Page" use either:
The printer's front panel
CentreWare IS
Using the Printer's Front Panel
To turn on/off the Startup Page:
1.
Printer
Setup, then press the OK button.
Select
2.
Printer
Controls, then press the OK button.
Select
The
Startup Page
3.
Press the OK button to change the setting.
Using CentreWare IS
To turn on/off the automatic printing of the "Startup Page":
1.
Launch your web browser.
2.
Enter your printer's IP address.
3.
Select Properties.
4.
Click Printer Defaults on the left sidebar of the Properties page.
5.
Select Off or On from the Printer Startup Page drop-down list to change the setting.
6.
Click Save Changes at the bottom of the page.
Copyright © 2003 Xerox Corporation. All Rights Reserved.
is highlighted. The end of the line displays the setting
1-14
Phaser® 6250 Color Laser Printer
(On
or Off).