Xerox Phaser 7300 Kullanıcı Kılavuzu - Sayfa 8

Yazıcı Xerox Phaser 7300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox Phaser 7300 50 sayfaları. Quick reference guide
Ayrıca Xerox Phaser 7300 için: Sorun Giderme Kılavuzu (40 sayfalar), Özellikler (1 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kurulum Kılavuzu (2 sayfalar), Özellikler Kılavuz (40 sayfalar), Destek Kılavuzu (28 sayfalar), Şartname (15 sayfalar), Genel Bakış (9 sayfalar), Kurulum ve Hızlı Referans Kılavuzu (45 sayfalar), Bakım Kılavuzu (11 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Xerox Phaser 7300 Kullanıcı Kılavuzu

Enabling DHCP on the printer

Make sure that the printer's DHCP protocol is enabled by setting the front panel or using
CentreWare IS.
Note
To determine your printer's IP address, select Printer Identification using the front panel or
print a copy of the Configuration Pages. For information about using the front panel, refer to
the Front Panel section of the Features Guide on the Interactive Documentation CD-ROM.

Setting the IP address using CentreWare Internet Services

CentreWare IS is a printer administration and support tool using web technology. With CentreWare IS
software, you can access printer status and manage your printer over a TCP/IP network using a web
browser. For more information, refer to CentreWare Internet Services (IS) in the Printer Management
section.
After setting the printer's IP address by another method, you can perform the rest of the TCP/IP
configuration using CentreWare IS.
1.
Connect to the printer via CentreWare IS by entering your printer's IP address into your browser.
2.
On the right side of the printer's main CentreWare IS page, click Properties.
3.
On the left side under Protocols, click TCP/IP.
4.
Enter your printer's settings and click Save Changes at the bottom of the page.

Resetting the printer using CentreWare Internet Services

1.
Connect to the printer via CentreWare IS by entering your printer's IP address into your browser.
2.
On the right side of the main CentreWare IS page, click Properties.
3.
Under the General tab, select Resets.
4.
Click Reset Printer. The printer does not update the web page until it finishes resetting.

Domain Name Service (DNS)

The printer supports DNS through an embedded DNS resolver. The DNS resolver protocol
communicates with one or more DNS servers to request the IP address for a given host name or the host
name for a given IP address.
To use an IP host name for the printer, the system administrator must have configured one or more DNS
servers and a local DNS domain name space database.
To set up the printer for DNS, supply up to two DNS name server IP addresses. There are two ways to
set up the printer:
DHCP
TCP/IP — See the next section.
Phaser® 7300 Color Printer
IP Address
3