Xerox Splash RPX-iii 700 Sorun Giderme Kılavuzu - Sayfa 12

Yazıcı Xerox Splash RPX-iii 700 için çevrimiçi göz atın veya pdf Sorun Giderme Kılavuzu indirin. Xerox Splash RPX-iii 700 18 sayfaları. Digital color press

Sayfayı Yazdır

Printing

If this happens

Start Page fails to print.

Color quality is inconsistent.

ROUBLESHOOTING

Intermittent print quality and color quality problems are difficult to trace. Before you

troubleshoot print quality problems, print a Start Page to make sure that the digital press does

not need servicing or adjusting.

A Fiery Start Page prints when the Fiery is turned on or restarted if Print Start Page is

OTE

enabled in Fiery Server Setup. For information about Fiery Setup, see the documentation that

accompanies your Fiery. An EFI Splash RPX-iii Startup Page prints when the EFI

Splash RPX-iii is started if Print Startup Page is enabled in the EFI Splash RPX-iii Server

Preferences.

Printing to the digital press

The following table describes some common problems and solutions.

Try this

• Make sure that the digital press is turned on and ready to print.

• Recheck that the crossover cable is present and properly connected to the Fiery.

• If the problem persists:

– Power off the digital press.

– Power off the RPX-iii Macintosh computer by choosing Shut Down from the Apple menu.

– Wait one minute.

– Power on the digital press, wait for the Fiery Start Page to print, and verify that the Fiery

IP address is correct.

– Power on the EFI Splash RPX-iii and start the Splash RPX-iii Server Software.

• If the problem persists, service the digital press.

• To check the color quality of the digital press, make copies of color documents from the

glass.

• The digital press may require service (call your authorized service/support center).