Xerox Versant 180 Press Hızlı Referans

Yazıcı Xerox Versant 180 Press için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Xerox Versant 180 Press 6 sayfaları. Quick reference for printing extra large sheets (xls) on the ex 180 and ex-i 180 print servers, powered by fiery
Ayrıca Xerox Versant 180 Press için: Güvenlik Kılavuzu (45 sayfalar), Hızlı Referans (2 sayfalar)

Sayfayı Yazdır

Xerox

Versant

Quick Reference for SIQA Alignment Adjustment

Simple Image Quality Adjustment (SIQA) is a maintenance tool that adjusts the quality

of the printed images generated by the Xerox

to perform an Alignment Adjustment with the SIQA tool:

1. Print the SIQA targets.

2. Scan the targets using either the Document Feeder or the Platen Glass.

3. Save the adjustment data to a file on the press providing the profile with a unique name.

The adjustment profile is then complete and can be selected by users for print runs, as needed.

Performing SIQA Alignment Adjustment

The Alignment procedure generates an individual alignment profile for each

stock/tray combination selected when performing the procedure. These profiles

ensure that images are placed correctly on the media. You can create up to 50

profiles. Each created profile will then be automatically used each time the

associated stock is used, ensuring optimal print quality.Follow these steps to

perform a Simple Image Quality Adjustment (SIQA) for alignment:

1. If not done already, you will need to print a pattern that is used during this

procedure. Print the PDF file called Black Background Sheet which is located on

www.xerox.com under the Versant 180 Documentation. This file is also in the

Install Nat kit.

The Black Background sheet is needed when creating profiles for media over

220gsm and/or larger than 11x17"/A3. Print the file duplex on either 11x17"

or A3 media – depending on your region.

The weight (gsm) is not important, but a higher gsm will result in a longer sheet life. Once someone at

your site prints this sheet, you can re-use it and do not have to print it again until it gets worn down with use.

2. At the Press UI, select the Login/Logout button.

3. Log-in as a System Administrator by typing admin as the ID (password).

4. Select the Machine Status button on the UI control panel.

5. Touch the Tools tab.

6. Select Setup & Adjustment on the left of the window..

7. Touch the Group button Alignment Adjustment Setup.

180 Press

Versant™ 180 Press. There are three sets of steps