Xerox WORKCENTRE 5740 Başlangıç Kılavuzu - Sayfa 28

Yazıcı Xerox WORKCENTRE 5740 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Xerox WORKCENTRE 5740 32 sayfaları. Smart card
Ayrıca Xerox WORKCENTRE 5740 için: Bilgi Kılavuzu (50 sayfalar), Veri Sayfası (18 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Güvenli Kurulum ve Çalıştırma (11 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Kullanıcı Talimatları (4 sayfalar), Nasıl Kopyalanır (10 sayfalar), Kurulum Kılavuzu (43 sayfalar)

Xerox WORKCENTRE 5740 Başlangıç Kılavuzu

Maintenance and Consumables

Maintenance and Consumables
There are several consumables on the device that need replenishing or replacing, such as paper,
staples, and customer replaceable units. To place an order for Xerox consumables, please contact your
local Xerox Representative giving your company name, product number and the machine serial
number.
For information about locating the serial number, please refer to
Machine and Job
Status.
Customer Replaceable Units
There are 6 replaceable units on the device:
Toner Cartridge (R1)
Xerographic Module (R2)
Fuser Module (R3)
Waste Toner Bottle (R4)
Ozone Filter (R5)
Document Feeder Feed Roll (R6)
The device will display a message on the touch screen when any of the units need to be reordered. This
message is a warning that the unit is nearing the end of its life. Only replace the unit when a message
actually instructs you to do so.
To replace a Customer Replaceable Unit, follow the instructions on the touch screen or use the
instructions provided with the consumable.
Staple Cartridges and Hole Punch Waste
If your device is equipped with a finisher, or a convenience stapler, you will be required to replace the
staple cartridge or cartridges when the device displays a message instructing you to do so. If your
finisher has the optional hole punch unit, you will also be required to empty the hole punch waste
container when prompted by the device.
Cleaning Tasks
Performing regular cleaning activities ensures the device is kept free of dust and debris. The device
covers, control panel and touch screen should all be cleaned using a soft lint-free cloth, lightly
dampened with water. Xerox Cleaning Fluid or Anti-Static Cleaner can be used to clean the document
glass, but must be applied using a cloth and not poured directly on the document glass. Remove any
residue with a clean cloth or paper towel.
For further information on maintenance tasks, refer to
Troubleshooting.
34
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Getting Started
Machine Information
General Care
on page 288 of
on page 245 of
General Care and